This project was carried out using coal sample from Onyeama coal mine Enugu, Enugu State. Activated coal was produced by carbonizing the coal and activating it using phosphoric acid at a temperature of 5500c. the degree of bleaching of raw palm oil was monitored using spectronic meter through absorbance measurement. The essence was to identify suitability of the coal as a bleaching agent on palm oil. Comparison of the result obtained was made with the commercial fuller’s earth.
From the result obtained that 0.45mm, 0.18mm and <0.075mm particle size of the activated coal was used at size and at variable temperature of 1200c, 1600c and 2000c were carried out, the average percented colour absorption for the activated coal from Enugu was found to be 80, 81 and 89 respectively. This, the optimal particle size, temperature and weight was obtained to be 0.18mm 2000c and log/100ml of palm oil respectively.
Further it was identified that the smaller the particle size of the activated coal, the higher the percentage colour reduction.
It was also observed that the temperature has a large effect on the bleaching of palm using coal. This percentage colour reduction increase as the temperature increases.
It could be conclude that coal is a poor absorber though if activated properly can used as a bleasching.
Title page
Letter of transmittal
Approval page
Dedication
Acknowledgement
Table of content
Abstract
1.0 CHAPTER ONE
1.1 Introduction
1.2 Scope/ objective
2.0 CHAPTER TWO
2.1 Historical origin of coal
2.2 Historical development of activated carbon
2.3 Formation of coal
2.4 Classification of coal
2.4a Bank
2.4b Ultimate analysis
2.4c Proximate analysis
2.50 Properties of coal
2.51 Physical properties of coal
2.52 Chemical properties
2.6 Uses of coal
2.7 Activated process
2.8 Coal activation process
2.81 Chemical activation
2.82 Coal classification
2.83 Classification process
2.84 Use at activated carbon
2.9 Use at activated carbon
3.0 CHAPTER THREE
3.0 Experimental process
3.1 Equipment and apparatus used
3.2 Material used
3.3 Experimental
3.3.1 Carbonization process
3.3.2 Activation process
3.4 Characterization of activated coal
3.4.1 Determination of bulk density and porosity
3.4.2 Save analysis
3.5 Bleaching operation
3.6 Characterization of oil sample (bleached)
3.6.1 Iodine value (IV)
3.6.2 Free fatty acid/acid value (A.V)
3.6.3 Specification value
3.6.4 Etherification value (S.V)
3.6.5 Peroxide value (P.V)
3.6.6 Specific gravity
3.6.7 Determination of melting point of palm oil
3.6.8 Determination of bolting point of palm oil
4.0 CHAPTER FOUR
Experimental
4.1 Table 4.1 determination of density and porosity
4.2 Table 4.2 sieve analysis table
4.3 Table 4.3 spectranic reading of the unbleached oil
4.4 Table 4.4 bleaching effect of activated coal
4.4 Table 4.6 iodine value
4.5 Table 4.7 specification value
4.6 Table 4.8 acid value
4.7 Table 4.9 peroxide value
4.8 Concise table characterization of activated coal and bleached oil
CHAPTER FIVE
Discussion
5.0 CHAPTER SIX
Recommendation and conclusion
Reference
Synthesis Of Activated Carbon From Enugu Coal. (n.d.). UniTopics. https://www.unitopics.com/project/material/synthesis-of-activated-carbon-from-enugu-coal/
“Synthesis Of Activated Carbon From Enugu Coal.” UniTopics, https://www.unitopics.com/project/material/synthesis-of-activated-carbon-from-enugu-coal/. Accessed 19 September 2024.
“Synthesis Of Activated Carbon From Enugu Coal.” UniTopics, Accessed September 19, 2024. https://www.unitopics.com/project/material/synthesis-of-activated-carbon-from-enugu-coal/
Here’s a typical structure for Synthesis Of Activated Carbon From Enugu Coal research projects:
- The title page of Synthesis Of Activated Carbon From Enugu Coal should include the project title, your name, institution, and date.
- The abstract of Synthesis Of Activated Carbon From Enugu Coal should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Synthesis Of Activated Carbon From Enugu Coal should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Synthesis Of Activated Carbon From Enugu Coal, identifying gaps the study aims to fill.
- The methodology section of Synthesis Of Activated Carbon From Enugu Coal should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Synthesis Of Activated Carbon From Enugu Coal research study using tables, charts, and graphs to illustrate key points.
- Interpret Synthesis Of Activated Carbon From Enugu Coal results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Synthesis Of Activated Carbon From Enugu Coal study and restate its significance.
- List all the sources you cited in Synthesis Of Activated Carbon From Enugu Coal project, following a specific citation style (e.g., APA, MLA, Chicago).