The aim of this research work is to carry out fault analysis of 11KV distribution power system. Electric power is an essential facilitator for sustainable development of the modern nation state. While Nigeria is reported to suffer from severe shortages of electric power the condition of some of its newer constitutional units are unknown. In this work, electric power infrastructure and energy availability is studied for Ado-Ekiti, the principal economic and political hub of Ekiti State. During the study, the condition of all relevant equipment for power distribution at the 11 kV level was assessed. Power availability was also considered by collecting necessary data that had to do with energy supplied, faults and other outages. It was discovered that the distribution lines were in a rather poor state with as many as 25% of the poles not meeting a condition of “goodness”, 33% of cross-arms being broken or unsatisfactory, about 10% of the insulators defective and almost 40% of the span not complying with standards. Hence this work presents a research on fault analysis of Ado Ekiti distribution power system.
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
1.2 PROBLEM STATEMENT
1.3 OBJECTIVES OF THE PROJECT
1.4 SCOPE OF THE PROJECT
CHAPTER TWO
LITERATURE REVIEW
2.0 LITERATURE REVIEW
2.1 ELEMENTS OF ELECTRIC POWER DISTRIBUTION
2.2 DISTRIBUTION SYSTEM
2.3 COMPONENTS OF ELECTRIC POWER DISTRIBUTION SYSTEM
2.4 DISTRIBUTION FAULTS
2.5 MOST LIKELY CAUSES OF FAULT ON H.T AND L.T OVERHEAD LINES
2.7 TYPES OF POWER SYSTEM PROTECTION
2.8 DIFFERENT TYPES OF POWER FAULTS
2.9 CAUSES OF ELECTRICAL FAULTS
2.10 EFFECTS OF ELECTRICAL FAULTS
CHAPTER THREE
3.0 METHOD
3.1 THE ADO- EKITI DISTRICT OF THE PHCN
3.2 STUDY PROCESS FOR ASSESSMENT
3.3 FAILURE RATE ANALYSIS
3.4 LOAD CURVE STUDIES
CHAPTER FOUR
4.0 RESULTS AND OBSERVATIONS OF THE FEEDER NETWORK IN THE ADO DISTRICT
4.1 ESTIMATION OF LOAD CURVES FOR THE ADO DISTRICT
4.2 ANALYSIS AND ASSESSMENT OF THE PERFORMANCE OF THE EPDS IN THE ADO DISTRICT
4.3 DISCUSSION
CHAPTER FIVE
5.1 CONCLUSIONS
5.2 RECOMMENDATION
5.3 REFERENCES
Single Line To Ground Fault Analysis In 11kV Distribution Feeder. (n.d.). UniTopics. https://www.unitopics.com/project/material/single-line-to-ground-fault-analysis-in-11kv-distribution-feeder/
“Single Line To Ground Fault Analysis In 11kV Distribution Feeder.” UniTopics, https://www.unitopics.com/project/material/single-line-to-ground-fault-analysis-in-11kv-distribution-feeder/. Accessed 22 November 2024.
“Single Line To Ground Fault Analysis In 11kV Distribution Feeder.” UniTopics, Accessed November 22, 2024. https://www.unitopics.com/project/material/single-line-to-ground-fault-analysis-in-11kv-distribution-feeder/
Here’s a typical structure for Single Line To Ground Fault Analysis In 11kV Distribution Feeder research projects:
- The title page of Single Line To Ground Fault Analysis In 11kV Distribution Feeder should include the project title, your name, institution, and date.
- The abstract of Single Line To Ground Fault Analysis In 11kV Distribution Feeder should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Single Line To Ground Fault Analysis In 11kV Distribution Feeder should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Single Line To Ground Fault Analysis In 11kV Distribution Feeder, identifying gaps the study aims to fill.
- The methodology section of Single Line To Ground Fault Analysis In 11kV Distribution Feeder should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Single Line To Ground Fault Analysis In 11kV Distribution Feeder research study using tables, charts, and graphs to illustrate key points.
- Interpret Single Line To Ground Fault Analysis In 11kV Distribution Feeder results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Single Line To Ground Fault Analysis In 11kV Distribution Feeder study and restate its significance.
- List all the sources you cited in Single Line To Ground Fault Analysis In 11kV Distribution Feeder project, following a specific citation style (e.g., APA, MLA, Chicago).