This project “production of plane mirror using local raw material” is meant to study the possibility of producing plane mirror using sand rich in silica as its major local raw material.
Plane mirror is produced by casting one side of a sheet glass. Presently in Nigeria, sheet glass is not used easily produce and as such, the local raw material used in the in the production of plane mirror in this product backing paint. The facilities for the production include spraying gun and finger brush.
In the course of production, the silver nitrate was first mixed with a reducing reagent; we formaldehyde of glucose, all in a distilled water. After which the mirror backing paint was mixed with some amount of thinner. The float glass was then washed with warm water and allowed to dry. After drying, it was first coated with silver nitrate solution after the use of talcum power to rub on the back of the glass.
A second spraying of mirror- backing paint was done after the silver nitrate coating had dried up. This whole operation now resulted to a plane-mirror since a plane mirror is also a coated glass.
The reflection of the mirror was taken after coating the glass, while the refractive index of the glass was taken before coating the float glass to form a mirror.
Title page
Approval page
Letter of transmittal
Dedication
Acknowledgement
Abstract
Table of content
CHAPTER ONE
INTRODUCTION
1.1 Historical Background
1.2 Definition:
1.3 Aims:
1.4 Scope of Study:
1.5 Uses:
1.6 Properties:
CHAPTER TWO
1.0 LITERATURE REVIEW
2.1 Plane Mirror
2.2 Raw Material for Production of Plane Mirror
2.2.1 Sand
2.2.2 Soda Ash (Sodium Trioxocarbonate Iv)
2.2.3 Limestone (Calcium Trioxocarbonate (W)
2.3.0 Other Raw Material (Ie Additives)
2.3.1 Colouring and Decolourizing Agents
2.3.2 Melting and Refining Agents
2.3.3 Opalizing Agents
2.2.4 Modifiers
2.3.5 Cullet
2.40 Types of Furnaces
2.4.1 Tank Furnance
2.4.2 Pot Furances
2.4.3 Day Tanks
2.4.3 Recuperative Furnance
2.5.0 Glass Formation
2.5.1 Glass Melting Process
2.5 Preparation of the Batch
2.5.1 Melting Of Glass
2.6 Types of Glasses
2.6.2 Float Glass
2.7 Manufacture of Mirror
2.7.1 Sequence of Production
2.7.2 Cutting
2.7.2 Labelling
2.7.3 Polishing
2.7.4 Washing Operation
2.7.5 Silvering Spraying
2.7.6 Painting
2.7.7 Oven
2.7.8 Cleaning and Inspection
2.7.10 Drilling
2.8.0 Types of Mirrors
2.9.0 Optical Properties of Mirror
2.9.1 Refractive Index and Dispersion
2.9.2 Transparency
CHAPTER THREE
3.0 Experiment Procedure for Production Of plane mirror
3.1 Raw Materials
3.2 Apparatus/Equipment
3.3 Preparation of mirror silvering chemical
3.4 Operational procedures involved in the production of plane mirror
3.5 Experimental Result
3.5.1 Refractive Index Of Glass
3.5.2 Reflection of Plane Mirror
3.61 Experimental Date For Refractive Index
3.61.1 Experimental Data For Reflection
3.5.2 Reflection of Plane Mirror
CHAPTER FOUR
DISCUSSION
CHAPTER FIVE
CONCLUSION
CHAPTER SIX
RECOMMENDATION
Production Of Plant Mirror Using Local Raw Material. (n.d.). UniTopics. https://www.unitopics.com/project/material/production-of-plant-mirror-using-local-raw-material/
“Production Of Plant Mirror Using Local Raw Material.” UniTopics, https://www.unitopics.com/project/material/production-of-plant-mirror-using-local-raw-material/. Accessed 24 November 2024.
“Production Of Plant Mirror Using Local Raw Material.” UniTopics, Accessed November 24, 2024. https://www.unitopics.com/project/material/production-of-plant-mirror-using-local-raw-material/
Here’s a typical structure for Production Of Plant Mirror Using Local Raw Material research projects:
- The title page of Production Of Plant Mirror Using Local Raw Material should include the project title, your name, institution, and date.
- The abstract of Production Of Plant Mirror Using Local Raw Material should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Production Of Plant Mirror Using Local Raw Material should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Production Of Plant Mirror Using Local Raw Material, identifying gaps the study aims to fill.
- The methodology section of Production Of Plant Mirror Using Local Raw Material should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Production Of Plant Mirror Using Local Raw Material research study using tables, charts, and graphs to illustrate key points.
- Interpret Production Of Plant Mirror Using Local Raw Material results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Production Of Plant Mirror Using Local Raw Material study and restate its significance.
- List all the sources you cited in Production Of Plant Mirror Using Local Raw Material project, following a specific citation style (e.g., APA, MLA, Chicago).