The project aims to develop a flow process to obtain the optimum temperature and time necessary for the maximum recovery of alkali present in palm inflorescence.
On this ground, a preliminary experiment was performed. During this process, both male and female palm inflorescence were compared for maximum alkali production and it was observed that the female palm inflorescence produced highest quantity of alkali than the male palm inflorescence. Based on this, the female palm inflorescence was used in performing the experiment.
Also, experiments were carried out to determine the optimum temperature and time for maximum alkali recovery. After the analysis and analytical calculations it was found that the optimum temperature for maximum alkali production is 4500c and the corresponding time for the production is 90 minutes.
Title page
Letter of transmittal
Dedication
Acknowledgement
Abstract
Table of content
1.0 CHAPTER ONE
INTRODUCTION
1.1 Need for local production of Alkali
2.0 CHAPTER TWO –
LITERATURE REVIEW
2.1 Oil palm tree (description)
2.1.1 Classification of palm and location
2.1.2 Oil palm: Historical review
2.2 Palm inflorescence
CHAPTER THREE
3.0 Experimental procedure
CHAPTER FOUR
Experimental results
CHAPTER SIX
Conclusion
CHAPTER SEVEN
Recommendation
References
CHAPTER EIGHT
Appendixes
Production of Alkali Using Local Raw Material (palm inforescence). (n.d.). UniTopics. https://www.unitopics.com/project/material/production-of-alkali-using-local-raw-material-palm-inforescence/
“Production of Alkali Using Local Raw Material (palm inforescence).” UniTopics, https://www.unitopics.com/project/material/production-of-alkali-using-local-raw-material-palm-inforescence/. Accessed 21 November 2024.
“Production of Alkali Using Local Raw Material (palm inforescence).” UniTopics, Accessed November 21, 2024. https://www.unitopics.com/project/material/production-of-alkali-using-local-raw-material-palm-inforescence/
Here’s a typical structure for Production of Alkali Using Local Raw Material (palm inforescence) research projects:
- The title page of Production of Alkali Using Local Raw Material (palm inforescence) should include the project title, your name, institution, and date.
- The abstract of Production of Alkali Using Local Raw Material (palm inforescence) should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Production of Alkali Using Local Raw Material (palm inforescence) should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Production of Alkali Using Local Raw Material (palm inforescence), identifying gaps the study aims to fill.
- The methodology section of Production of Alkali Using Local Raw Material (palm inforescence) should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Production of Alkali Using Local Raw Material (palm inforescence) research study using tables, charts, and graphs to illustrate key points.
- Interpret Production of Alkali Using Local Raw Material (palm inforescence) results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Production of Alkali Using Local Raw Material (palm inforescence) study and restate its significance.
- List all the sources you cited in Production of Alkali Using Local Raw Material (palm inforescence) project, following a specific citation style (e.g., APA, MLA, Chicago).