The metal bending machine is designed to be manually operated. The bending machine with working capacity to complete a 900 fold of a full-length plate (8 ft = 2400mm) and up to 2.5mm thickness. The construction is based on initial machine design, materials. The machine can be used to perform any type of bending. It consist of heavy beams which are coupled together to bring about any shape of bending after the flat sheet has been marked out to specified dimensions. It serves as invaluable equipment because it offers solution to the technology of sheet metals in Nigeria.
Front page
Certification
Dedication
Acknowledgement
Abstract
Table of content
Project topic 1
Aim 1
Procedures 1
Selected materials 2
Equipment 3
CHAPTER ONE
1.0 INTRODUCTION 4
1.1 Importance of Sheet Metal Work and Bending Machines . 4-9
1.2 Historical Review and Classification of Bending Machines. 9-12
1.3 Operational Characteristic of the Bending Machine 12-14
CHAPTER TWO
2.0 BENDING TECHNOLOY 15
2.1 Principles of Bending 15-17
2.2 The mechanics of Bending 17-19
2.3 Plastic Deformation Due to Bending 20-21
2.4 Spring Back 21-22
2.5 Method for Compensating Spring Back 22-16
2.6 Method of Determining Angle of Spring Back 26-27
CHAPTER THREE
3.0 DESIGN CONSIDERATION 28
3.1 Bending Stress 28-31
3.2 Material Selections 32
3.2.1 Physical Properties of Metal 32-33
3.2.2 Mechanical Properties of Metal 34-38
3.3 Material Selection Table 39
CHAPTER FOUR
4.0 COMPONENT DESIGN, CONSTRUCTION,
CHAPTER FIVE
5.0 ANALYSIS 54
5.1 Construction 55
5.2 Anticipated Faults and Corrections 55-56
5.3 Maintenance 56-57
5.4 Conclusion 57
5.5 Recommendations 58
References
Modification Of An Existing Metal Sheet-Bending Machine. (n.d.). UniTopics. https://www.unitopics.com/project/material/modification-of-an-existing-metal-sheet-bending-machine/
“Modification Of An Existing Metal Sheet-Bending Machine.” UniTopics, https://www.unitopics.com/project/material/modification-of-an-existing-metal-sheet-bending-machine/. Accessed 21 November 2024.
“Modification Of An Existing Metal Sheet-Bending Machine.” UniTopics, Accessed November 21, 2024. https://www.unitopics.com/project/material/modification-of-an-existing-metal-sheet-bending-machine/
Here’s a typical structure for Modification Of An Existing Metal Sheet-Bending Machine research projects:
- The title page of Modification Of An Existing Metal Sheet-Bending Machine should include the project title, your name, institution, and date.
- The abstract of Modification Of An Existing Metal Sheet-Bending Machine should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Modification Of An Existing Metal Sheet-Bending Machine should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Modification Of An Existing Metal Sheet-Bending Machine, identifying gaps the study aims to fill.
- The methodology section of Modification Of An Existing Metal Sheet-Bending Machine should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Modification Of An Existing Metal Sheet-Bending Machine research study using tables, charts, and graphs to illustrate key points.
- Interpret Modification Of An Existing Metal Sheet-Bending Machine results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Modification Of An Existing Metal Sheet-Bending Machine study and restate its significance.
- List all the sources you cited in Modification Of An Existing Metal Sheet-Bending Machine project, following a specific citation style (e.g., APA, MLA, Chicago).