The fabrication of a set of sieves and shaker was carried out in paliton workshop, Enugu. After a thorough analysis on the suitable materials to be used in fabrication, galvanized steel was chosen due to its advantages over materials of fabrication. The fabrication was carried out in order to analyze the sizes of particles. The component parts of the sets of sieve and their dimensions are as follows:
Height of sieve 5.5cm
Number of sieves 7
Diameter of sieve 13.5cm
Shape of sieve circular
Height of sieve set 44cm
In fabricating this set of sieves, some factors were taken into consideration and they are:
The capacity of the sieve.
The type of mixture that can be filtered in it.
The types of properties and composition of the mixture.
The type of material to be used for fabrication of the sieve and shaker.
The mechanism of the filtration process and also,
The cost, which is the determinant, factor in fabrication of any equipment.
These factors help greatly in the fulfillment of the objective of this project study. And after fabrication the projects were tested and seem to be working very efficiently with a reasonable separation of particle and cut diameter.
Using the above dimensions, the following fabrication procedures were undertaken, layout, cutting, drilling, welding, filling sand papering, washing and painting, drying assembling.
Finally, the set of sieves and shaker were subjected to the process of washing, painting and drying.
Title page
Approval page
Letter of transmittal
Dedication
Acknowledgement
Abstract
Table of content
CHAPTER ONE
1.0 INTRODUCTION
CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 Model
2.2 Screening
2.3 Types of screens
2.4 Screen surface
2.5 Factors in selecting screen equipment
2.6 Method of feed
CHAPTER THREE
3.0 MATERIAL OF CONSTRUCTION
3.1 Aluminum and aluminum alloy
3.2 Carbon and low alloys steel
3.3 Corrosion
3.4 Contact or galvanic corrosion
CHAPTER FOUR
4.0 FABRICATIONAL PROCEDURE
4.1 Layout
4.2 Cutting
4.3 Drilling
4.4 Welding
4.5 Filling
4.6 Sand papering
4.7 Washing and painting
4.8 Drying
4.9 Assembling
CHAPTER FIVE
5.0 OPERATION AND MAINTENANCE
5.1 Function of some parts of the electrically vibrated screen.
CHAPTER SIX
6.0 RECOMMENDATION AND CONCLUSION
6.1 Costing
REFERENCE
Fabrication For A Set Of Sieves And Shaker. (n.d.). UniTopics. https://www.unitopics.com/project/material/fabrication-for-a-set-of-sieves-and-saker/
“Fabrication For A Set Of Sieves And Shaker.” UniTopics, https://www.unitopics.com/project/material/fabrication-for-a-set-of-sieves-and-saker/. Accessed 22 November 2024.
“Fabrication For A Set Of Sieves And Shaker.” UniTopics, Accessed November 22, 2024. https://www.unitopics.com/project/material/fabrication-for-a-set-of-sieves-and-saker/
Here’s a typical structure for Fabrication For A Set Of Sieves And Shaker research projects:
- The title page of Fabrication For A Set Of Sieves And Shaker should include the project title, your name, institution, and date.
- The abstract of Fabrication For A Set Of Sieves And Shaker should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Fabrication For A Set Of Sieves And Shaker should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Fabrication For A Set Of Sieves And Shaker, identifying gaps the study aims to fill.
- The methodology section of Fabrication For A Set Of Sieves And Shaker should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Fabrication For A Set Of Sieves And Shaker research study using tables, charts, and graphs to illustrate key points.
- Interpret Fabrication For A Set Of Sieves And Shaker results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Fabrication For A Set Of Sieves And Shaker study and restate its significance.
- List all the sources you cited in Fabrication For A Set Of Sieves And Shaker project, following a specific citation style (e.g., APA, MLA, Chicago).