In the sense that the materials involved in this project were capital intensive more especially cement, so in carrying out the work one must hsve to be careful in the selection and collection of materials to be used in the casting of the concrete.
The materials used are coarse aggregate (granite) fine aggregate (sand). The coarse aggregates used in this work were collected from ishiagu while the fine aggregate was collected in front of the carpentry’s workshop on the campus.
The test conform to the standard method test, the ratio used was 1:2:4 and the method adopted was batching by weight, from the mix ratio the relative weight for each material to be used for concrete cube cast was 36, these cubes were tested for compressive strength of 7, 14 and 28 days.
The results of tests involved in the work and that of compressive strength tests were calculated and tabulated as shown in the final tabulation of results.
With the above information, I now recommend and therefore conclude.
Title page
Latter of transmittal
Approval page
Dedication
Acknowledgement
Abstract
Table of contents
CHAPTER ONE
1.1 The project objectives
CHAPTER TWO
2.1 Materials for concrete
2.2 Aggregates introduction
2.2.1 Fine Aggregate/Sand
2.2.2 Coarse Aggregate/Granite
CHAPTER THREE
3.0 Mixing of the concrete
CHAPTER FOUR
4.0 Preparation for placing and compaction
CHAPTER FIVE
5.0 Curing
CHAPTER SIX
6.0 Testing of hardened concrete and tabulation of results
CHAPTER SEVEN
7.0 Conclusions and recommendation
Bibliography.
Effects Of Aggregate Sizes On The Concrete Strength. (n.d.). UniTopics. https://www.unitopics.com/project/material/effects-of-aggregate-sizes-on-the-concrete-strength/
“Effects Of Aggregate Sizes On The Concrete Strength.” UniTopics, https://www.unitopics.com/project/material/effects-of-aggregate-sizes-on-the-concrete-strength/. Accessed 19 September 2024.
“Effects Of Aggregate Sizes On The Concrete Strength.” UniTopics, Accessed September 19, 2024. https://www.unitopics.com/project/material/effects-of-aggregate-sizes-on-the-concrete-strength/
Here’s a typical structure for Effects Of Aggregate Sizes On The Concrete Strength research projects:
- The title page of Effects Of Aggregate Sizes On The Concrete Strength should include the project title, your name, institution, and date.
- The abstract of Effects Of Aggregate Sizes On The Concrete Strength should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Effects Of Aggregate Sizes On The Concrete Strength should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Effects Of Aggregate Sizes On The Concrete Strength, identifying gaps the study aims to fill.
- The methodology section of Effects Of Aggregate Sizes On The Concrete Strength should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Effects Of Aggregate Sizes On The Concrete Strength research study using tables, charts, and graphs to illustrate key points.
- Interpret Effects Of Aggregate Sizes On The Concrete Strength results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Effects Of Aggregate Sizes On The Concrete Strength study and restate its significance.
- List all the sources you cited in Effects Of Aggregate Sizes On The Concrete Strength project, following a specific citation style (e.g., APA, MLA, Chicago).