Design Of Road Pavements

A case study of I.M.T Campus III environment Enugu
ABSTRACT

This thesis on a project undertaken by the author is aimed at providing explanation of the basic theory of the work of road design and its associated activities also, to cover practical methods of working.
In pursuit of the meaningful completion this project a lot of investigation was embarked with principles and practice of road construction. The total distance of route was determined and stations established bearing in mind the intervisibility of the stations.
Leveling was carried out to obtain information on the profile of the route for proper earthwork knowledge which theodolite traversing was carried out to obtain the plan and horizontal alignment of the route
Soil analysis, gave the proper constitute of the soil which was also carried out to and in the pavement design. Therefore the pavement design of the route was abased on the results obtained from the soil analysis using the CBR method.

TABLE OF CONTENTS

INTRODUCTION
1.1 Relevance of project
1.2 Site inspection
1.3 Evolution of road network in nigeria
1.4 Motor vehicle characteristic that affects road design data
1.5 Drivers and their characteristics
1.6 Reconnaissance survey
1.6.1 Chain survey
1.6.2 Station marking
1.7 Factors Affecting Choice Of Station

CHAPTER TWO
THEODOLITE TRANSVERSING OF THE ROAD CONTROL
2.1 Definitions
2.2 Thetheodolite
2.3 Theodorite adjustment
2.3.1 Temporary adjustment
2.3.2 Permanent adjustment
2.4 Procedure for theodolite traversing
2.5 Materials used for the theodolte traversinging

CHAPTER THREE
PROJECT FIELD LEVELING WORK
3.1 Leveling
3.2 Profile leveling
3.3 Cross leveling
3.4 Objectives of leveling
3.5 Instruments used in leveling
3.6 Temporary adjustment of leveling instrument
3.7 Definition of some leveling terminologies
3.8 Leveling book
3.9 Earthwork computation
3.9.1 Method

CHAPTER FOUR
SOIL ANALYSIS
4.1 Collection and preliminary preparation of samples
4.2 Mechanical analysis
4.3 Atterberg/consistency limit tests
4.3.1 Liquid limit test
4.3.2 Plastic limit test
4.4 Compaction test
4.5 The California bearing ratio (cbr) test
4.6 Pavement design using cbr

CHAPTER FIVE
GEOMETRIC ELEMENTS DESIGN
5.1 Basic design parameters
5.1.1 Design speed
5.1.2 Gradient
5.1.3 Sight distance
5.2 Curve design
5.3 Curve parameters and formula used, in designing of horizontal curves
5.4 Vertical curve design
5.5 Cross sectional elements of the road
5.6 Brief description on stages of work and equipment used n road constriction
5.7 Summary and conclusion
Bibliography

WORK DETAILS

Chapters:
5
Pages:
90
Words:
11975

Here’s a typical structure for Design Of Road Pavements research projects:

  • The title page of Design Of Road Pavements should include the project title, your name, institution, and date.
  • The abstract of Design Of Road Pavements should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
  • The introduction of Design Of Road Pavements should provide the background information, outline the research problem, and state the objectives and significance of the study.
  • Review existing research related to Design Of Road Pavements, identifying gaps the study aims to fill.
  • The methodology section of Design Of Road Pavements should describe the research design, data collection methods, and analytical techniques used.
  • Present the findings of the Design Of Road Pavements research study using tables, charts, and graphs to illustrate key points.
  • Interpret Design Of Road Pavements results, discussing their implications, limitations, and potential areas for future research.
  • Summarize the main findings of the Design Of Road Pavements study and restate its significance.
  • List all the sources you cited in Design Of Road Pavements project, following a specific citation style (e.g., APA, MLA, Chicago).
WORK DETAILS

Chapters:
5
Pages:
90
Words:
11975