This work deals extensively with the design and construction of an electrodice display (EOD) with audio unit. The device displays the value of a ludo dice in numerical form and also produces sound as it displays the number.
The device works with principle of chance employed by ludo game players. The output of the display is usually very rapid that the player does not actually see the number when the device is switched ON so that it will purely be a game of chance. When the off key is pressed, a particular number is displayed and this number is the number the player got.
The operation of the device starts by the generation of a pulse frequency. The pulse frequency (square wave signal) is generated by times (555 timer) by connecting in unstable multi-vibrator. The output from the timer is used in clocking the binary counter (mode 10 counter) but this counter is biased in the mode 10 counter, the output from Qo, Q1 and Q2 were connected to the reset pins so that once the counter finishes the count of six of goes back to zero.
The result from the binary counter is then fed to the decoder / driver before connecting it to seven segment so that the decoder will be able to convert the binary values to the decimal values that are being used in the ludo game dice. The seven segment then displays the numbers by lightening the diodes that make up that particular.
This device is being regulated by a latch (4-edge triggered flip-flop which has two switches, one is used for putting the power supply and the other two push switches for the working of the dice display.
Cover page
Title page
Approval page
Dedication
Acknowledgement
Abstract
Organization of work
List of figures
List of table
CHAPTER ONE
INTRODUCTION
1.0 Statement of problem
1.1 Purpose of study
1.2 Aim and objectives
1.3 Scope of the study
1.4 Limitations of the study
1.5 Definitions of terms.
CHAPTER TWO
LITERATURE REVIEW
CHAPTER THREE
DESCRIPTION AND ANALYSIS OF THE EXISTING SYSTEM FACT FINDING METHODS
Organization structure
Objectives of the existing system
CHAPTER FOUR
DESIGN OF THE NEW SYSTEM
Output specification and design
Input specification and design
File design.
Procedure chart
System flow chart
System Requirement.
CHAPTER FIVE
IMPLEMENTATION
Program Design
Program Flowchart
Pseudo codes
CHAPTER SIX
DOCUMENTATION
CHAPTER SEVEN
RECOMMENDATION
CONCLUSION
REFERENCE
Design And Simulation Of An Electric Device With Audio Unit. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-simulation-of-an-electric-device-with-audio-unit/
“Design And Simulation Of An Electric Device With Audio Unit.” UniTopics, https://www.unitopics.com/project/material/design-and-simulation-of-an-electric-device-with-audio-unit/. Accessed 22 November 2024.
“Design And Simulation Of An Electric Device With Audio Unit.” UniTopics, Accessed November 22, 2024. https://www.unitopics.com/project/material/design-and-simulation-of-an-electric-device-with-audio-unit/
Here’s a typical structure for Design And Simulation Of An Electric Device With Audio Unit research projects:
- The title page of Design And Simulation Of An Electric Device With Audio Unit should include the project title, your name, institution, and date.
- The abstract of Design And Simulation Of An Electric Device With Audio Unit should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Simulation Of An Electric Device With Audio Unit should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Simulation Of An Electric Device With Audio Unit, identifying gaps the study aims to fill.
- The methodology section of Design And Simulation Of An Electric Device With Audio Unit should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Simulation Of An Electric Device With Audio Unit research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Simulation Of An Electric Device With Audio Unit results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Simulation Of An Electric Device With Audio Unit study and restate its significance.
- List all the sources you cited in Design And Simulation Of An Electric Device With Audio Unit project, following a specific citation style (e.g., APA, MLA, Chicago).