Aim: This main aim of this work is to build a simple fire alarm. Fire alarm is an electronics device that is stored in a building to detect the presence of fire accident. An automatic fire alarm system is designed to detect the unwanted presence of fire by monitoring environmental changes associated with combustion.
Method: The device was first built on a breadboard which is later transfer to vero board and soldered.
Result: The device was completely build and coupled, the result during the test shows that the fire alarm was able to respond to its operation when smoke is brought close to the sensor
Conclusion and Recommendation: At the end of this project – fire alarm device was built and tested. This type of device is important because there is always risk of fire accident in our environment.
Cover page
ii. Certification
iii. Dedication
iv. Acknowledgement
v. Abstract:
CHAPTER ONE
INTRODUCTION
1.1 Background of the Study
1.2 Problem Statement
1.3 Hypothesis/Research Questions
1.4 Objective of Study
1.5 Significance of Study
1.6 Scope of Study
1.7 Limitations of Study
1.8 Definitions of terms
CHAPTER TWO
LITERATURE REVIEW
2.1 Review of Related works
2.2 Contribution to Knowledge
2.3 Proposed system’s Theories
2.4 Expected Results from Hardware &Software
CHAPTER THREE
DESIGN METHODOLOGY
3.1 Material Parts List
3.2Hardware Design Methods
3.3 Software Design Methods
CHAPTER FOUR
RESULTS/ANALYSIS
4.1 Testing of Hardware and software
4.2 Hardware Result/analysis
4.3 Software result/analysis
CHAPTER FIVE
SUMMARY,CONCLUSION AND RECONMENDATIONS
5.1 Summary
5.2 Conclusion
5.3 Recommendation
References
Design And Construction Of A Fire Alarm System Using Photo Diode. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-onstruction-of-a-fire-alarm-system-using-photo-diode/
“Design And Construction Of A Fire Alarm System Using Photo Diode.” UniTopics, https://www.unitopics.com/project/material/design-and-onstruction-of-a-fire-alarm-system-using-photo-diode/. Accessed 22 November 2024.
“Design And Construction Of A Fire Alarm System Using Photo Diode.” UniTopics, Accessed November 22, 2024. https://www.unitopics.com/project/material/design-and-onstruction-of-a-fire-alarm-system-using-photo-diode/
Here’s a typical structure for Design And Construction Of A Fire Alarm System Using Photo Diode research projects:
- The title page of Design And Construction Of A Fire Alarm System Using Photo Diode should include the project title, your name, institution, and date.
- The abstract of Design And Construction Of A Fire Alarm System Using Photo Diode should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Construction Of A Fire Alarm System Using Photo Diode should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Construction Of A Fire Alarm System Using Photo Diode, identifying gaps the study aims to fill.
- The methodology section of Design And Construction Of A Fire Alarm System Using Photo Diode should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Construction Of A Fire Alarm System Using Photo Diode research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Construction Of A Fire Alarm System Using Photo Diode results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Construction Of A Fire Alarm System Using Photo Diode study and restate its significance.
- List all the sources you cited in Design And Construction Of A Fire Alarm System Using Photo Diode project, following a specific citation style (e.g., APA, MLA, Chicago).