The 200W solar system was determined by load assessment, solar panel number determination, battery requirement and then inverter sizing. A complete solar panel rated at 200w was however purchased, together with 2 no. 150A solar battery, 1500W inverter and also 10A charge controller. These were assembled together with necessary protective gadgets like cut out switches; to give the 200W expected. The solar panel was mounted outside the building to allow for maximum collection of sun energy. It is expected that the system will help the department meet up with its office duties even when central power is not available.
Title Page
Approval page
Dedication
Acknowledgement
Abstract
Table of content
List of figures
List of tables
CHAPTER ONE:
1.0 INTRODUCTION
1.1 Need for the project
1.3 Scope of study
1.4 Definition of terms
CHAPTER TWO:
2.0 LITERATURE REVIEW
2.1 The basics of solar power system
2.2 Principle of solar panel
2.2.1 Estimating system out
2.2.2 Standard test conditions
2.2.3 Temperature
2.2.4 Dirt and dust
2.2.5 Mismatch and wiring losses
2.3 Solar charge controller
2.4 Principle of inverter
2.4.1 Inverter sizing
2.4.2 DC to AC conversion losses
2.5 solar battery
2.5.1 Temperature effect
2.5.2 Battery voltage
2.5.3 Battery power conversion efficiency
2.5.4 Monitoring and maintenance
CHAPTER THREE:
3.0 SYSTEM OPERATION
3.1 Block diagram of the system
3.2 System operation with block diagram
CHAPTER FOUR:
4.0 SYSTEM DESIGN
4.1 Load evaluation and power consumption table
4.1.1 Calculating power consumption
4.2 Battery sizing
4.3 Solar panel sizing
4.3.1 Typical Pv electrical system types
4.3.2 Solar array sizing worksheet
CHAPTER FIVE:
5.0 PROCUREMENT AND INSTALLATION
5.1 Procurement
5.2 Determination of installation site
5.2.1 Mounting options
5.3 Installation procedure
CHAPTER SIX:
6.0 TEST AND RESULT
6.1 Test and results
CHAPTER SEVEN:
7.0 CONCLUSION AND RECOMMENDATION
7.1 Conclusion
7.2 Recommendation
7.3 Limitation
Reference
Design And Installation Of 200 Watt Solar Power System. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-installation-of-200-watt-solar-power-system/
“Design And Installation Of 200 Watt Solar Power System.” UniTopics, https://www.unitopics.com/project/material/design-and-installation-of-200-watt-solar-power-system/. Accessed 22 November 2024.
“Design And Installation Of 200 Watt Solar Power System.” UniTopics, Accessed November 22, 2024. https://www.unitopics.com/project/material/design-and-installation-of-200-watt-solar-power-system/
Here’s a typical structure for Design And Installation Of 200 Watt Solar Power System research projects:
- The title page of Design And Installation Of 200 Watt Solar Power System should include the project title, your name, institution, and date.
- The abstract of Design And Installation Of 200 Watt Solar Power System should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Installation Of 200 Watt Solar Power System should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Installation Of 200 Watt Solar Power System, identifying gaps the study aims to fill.
- The methodology section of Design And Installation Of 200 Watt Solar Power System should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Installation Of 200 Watt Solar Power System research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Installation Of 200 Watt Solar Power System results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Installation Of 200 Watt Solar Power System study and restate its significance.
- List all the sources you cited in Design And Installation Of 200 Watt Solar Power System project, following a specific citation style (e.g., APA, MLA, Chicago).