This project work focuses on the computerization of information Management Seismic Data Processing system to increase services and enhancement of Oil producing Industries.
The purpose of these study is to ensure good seismic data in effective manner, ensure that all field tapes collected from the field are sent to the processing centre and it’s seismic data tapes are presented in a form that is convenient for geological interpretation, ensure that processing sequence are followed and a good result suitable for acceptance etc.
The problem of this study is how can this information collected from the field be presented and protected from destruction. Tape librarians were introduced to help manage the tapes, but as time goes on, the member of tapes acquired becomes, so large in number that the librarians cannot manage them effectively.
The solutions to the problem lies in removing any factor inhibit the ability of the librarian to make the storage and retrieval of the tape easy in the organization.
Title Page
Certification
Dedication
Acknowledge
Abstract
Table of Content
CHAPTER ONE
Introduction 1-2
1.1 Problem of the study 3
1.2 Purpose of the study 4
1.3 Scope of the study 4
1.4 Limitation 4
CHAPTER TWO
Literature Review 5-9
CHAPTER THREE
Description and Analysis of the existing and new system Design. 10
3.1 Fact finding method (oral) 10-11
3.2 Organization Structure 11-12
3.3 Objective of the existing system 13
3.4 Problems of the existing system 14
3.5 Justification 14-15
3.6 Input, Process, Output analysis 15-20
3.7 Design of New System 21
3.8 Output Specification and design 22
3.9 Input Specification and design 22-24
3.10 File design 24
3.11 Procedure chart 24-25
3.12 System Flowchart 26
3.13 System Requirement 27-28
CHAPTER FOUR
Implementation 29
4.1 Program design 30
4.2 Program Flowchart 30-33
4.3 Test run 34
4.4 Documentation 35-40
CHAPTER FIVE
5.1 Recommendation 41-42
5.2 Conclusion 43-44
Definition of term
Reference
Design And Implementation Of Computerized Information Management System In Seismic Data Processing. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-implementation-of-computerized-information-management-system-in-seismic-data-processing/
“Design And Implementation Of Computerized Information Management System In Seismic Data Processing.” UniTopics, https://www.unitopics.com/project/material/design-and-implementation-of-computerized-information-management-system-in-seismic-data-processing/. Accessed 19 September 2024.
“Design And Implementation Of Computerized Information Management System In Seismic Data Processing.” UniTopics, Accessed September 19, 2024. https://www.unitopics.com/project/material/design-and-implementation-of-computerized-information-management-system-in-seismic-data-processing/
Here’s a typical structure for Design And Implementation Of Computerized Information Management System In Seismic Data Processing research projects:
- The title page of Design And Implementation Of Computerized Information Management System In Seismic Data Processing should include the project title, your name, institution, and date.
- The abstract of Design And Implementation Of Computerized Information Management System In Seismic Data Processing should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Implementation Of Computerized Information Management System In Seismic Data Processing should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Implementation Of Computerized Information Management System In Seismic Data Processing, identifying gaps the study aims to fill.
- The methodology section of Design And Implementation Of Computerized Information Management System In Seismic Data Processing should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Implementation Of Computerized Information Management System In Seismic Data Processing research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Implementation Of Computerized Information Management System In Seismic Data Processing results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Implementation Of Computerized Information Management System In Seismic Data Processing study and restate its significance.
- List all the sources you cited in Design And Implementation Of Computerized Information Management System In Seismic Data Processing project, following a specific citation style (e.g., APA, MLA, Chicago).