The purpose of the study is to computerize quality control system in production (A case study of Anammco Nig. Ltd Enugu) and to develop a computer packages whereby the technique observed from the manual method can be improved on.
It is a known feet that the manual method of quality control in production has been associated with lots of inaccuracy in quality control and this has lead to early break down of parts when in service.
The software when developed will facility and enhanced the mode and methods of quality control in spare parts production of Anamco.
Title page
Certification
Dedication
Acknowledgement
Abstract
Organization of the work
Table of contents
CHAPTER ONE
1.0 Introduction
1.1 Background information on Anammco
1.2 Justification of the project
1.3 Purpose of the study
1.4 Scope of study
1.5 Aims and objectives
CHAPTER TWO
2.1 Literature review
CHAPTER THREE
3.1 Description and analysis of the existing system
3.2 Fact finding methods
3.3 Organisation structure
3.4 Objectives of the existing system
3.5 Justification for the new system
CHAPTER FOUR
4.1 Design of the new system
4.2 Output specification and design
4.3 Input specification and design
4.4 File design
4.5 Procedure chart
4.6 System flowchart
4.7 System requirement
CHAPTER FIVE
5.1 Implementation
5.2 Program design
5.3 Program flowchart
5.4 Pseudocodes
5.5 Test run
CHAPTER SIX
6.1 Documentation
CHAPTER SEVEN
7.1 Recommendation
References
Design And Implementation Of A Software Based Quality Control System. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-implementation-of-a-software-based-quality-control-system/
“Design And Implementation Of A Software Based Quality Control System.” UniTopics, https://www.unitopics.com/project/material/design-and-implementation-of-a-software-based-quality-control-system/. Accessed 20 September 2024.
“Design And Implementation Of A Software Based Quality Control System.” UniTopics, Accessed September 20, 2024. https://www.unitopics.com/project/material/design-and-implementation-of-a-software-based-quality-control-system/
Here’s a typical structure for Design And Implementation Of A Software Based Quality Control System research projects:
- The title page of Design And Implementation Of A Software Based Quality Control System should include the project title, your name, institution, and date.
- The abstract of Design And Implementation Of A Software Based Quality Control System should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Implementation Of A Software Based Quality Control System should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Implementation Of A Software Based Quality Control System, identifying gaps the study aims to fill.
- The methodology section of Design And Implementation Of A Software Based Quality Control System should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Implementation Of A Software Based Quality Control System research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Implementation Of A Software Based Quality Control System results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Implementation Of A Software Based Quality Control System study and restate its significance.
- List all the sources you cited in Design And Implementation Of A Software Based Quality Control System project, following a specific citation style (e.g., APA, MLA, Chicago).