This write up outlines the design and fabrication of wood lathe machine. This type of lathe is capable of creating different wood designs using the cheapest available material and method.
To achieve functional and efficient wood lathe of this kind, we analyzed as well as synthesized the different possible design solutions and concepts.
The principle of turner is puts into consideration the case of its production, main finance and services, values durability, reliability and appearance of the machine.
Finally, the parts were assembled and the machine test run. To ensure the achievement of best performance, iterative procedures were carried out. The material, labour and overhead costs were determined to get the production cost of a prototype.
Title page
Certification
Dedication
Acknowledgement
Abstract
Table of contents.
CHAPTER ONE
1.0 Introduction
1.1 Objectives
1.2 Literature Review
1.3 Trend
1.4 Statement of Problem
1.5 Purpose of Study
1.6 Scope of Work
CHAPTER TWO
2.0 Synthesis
2.1 Theory of Design
2.2 Materials Selection
2.3 Analysis
2.4 Resolution of Forces
2.5 Reaction, Force and Moment Digrams
2.6 Maximum Shear and Bending Stresses
CHAPTER THREE
3.0 Assembly Procedure
3.1 Testing and Evaluation
3.2 Operational /Safety Guide
3.3 General Maintenance
CHAPTER FOUR
4.0 Cost Analysis
4.1 Material Cost
4.2 Labour Cost
4.3 Overhead Cost
4.4 Summary of Costs
CHAPTER FIVE
5.0 Conclusion
51. Recommendations
52. References
Design And Fabrication Of Wood Lathe Machine. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-fabrication-of-wood-lathe-machine/
“Design And Fabrication Of Wood Lathe Machine.” UniTopics, https://www.unitopics.com/project/material/design-and-fabrication-of-wood-lathe-machine/. Accessed 22 February 2025.
“Design And Fabrication Of Wood Lathe Machine.” UniTopics, Accessed February 22, 2025. https://www.unitopics.com/project/material/design-and-fabrication-of-wood-lathe-machine/
Here’s a typical structure for Design And Fabrication Of Wood Lathe Machine research projects:
- The title page of Design And Fabrication Of Wood Lathe Machine should include the project title, your name, institution, and date.
- The abstract of Design And Fabrication Of Wood Lathe Machine should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Fabrication Of Wood Lathe Machine should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Fabrication Of Wood Lathe Machine, identifying gaps the study aims to fill.
- The methodology section of Design And Fabrication Of Wood Lathe Machine should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Fabrication Of Wood Lathe Machine research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Fabrication Of Wood Lathe Machine results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Fabrication Of Wood Lathe Machine study and restate its significance.
- List all the sources you cited in Design And Fabrication Of Wood Lathe Machine project, following a specific citation style (e.g., APA, MLA, Chicago).