Cooker plays an integral role in oil and gas well pads. They generate the heat necessary for separating the oil, gas and water mixture and to keep the gases in their vapor phase during transportation through pipelines. Industrial cooker typically use a portion of the gas coming out of the ground as the fuel to produce the flame for heating. The gases extracted from the ground enter the burner skid (commonly referred to as burner fuel train) at a high pressure and hence they need to be pressure controlled for use in cooker. This work is on fabrication of an industrial gas cooker.
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
CHAPTER ONE
INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
1.2 OBJECTIVE OF THE PROJECT
1.3 HOW COMBUSTION OCCUR IN COOKER
1.4 SIGNIFICANCE OF THE PROJECT
1.5 APPLICATION OF THE PROJECT
1.6 LIMITATION OF THE PROJECT
CHAPTER TWO
LITERATURE REVIEW
2.1 REVIEW OF FUEL GAS
2.2 HISTORICAL BACKGROUND OF FUEL
2.3 FLAME TEMPERATURES OF COMMON GASES AND FUELS
2.4 EXPLOSIVE LIMITS AND IGNITION TEMPERATURES OF COMMON GASES
2.5 COMBUSTION VALUES OF COMMON GASES
CHAPTER THREE
METHODOLOGY
3.1 MAJOR COMPONENTS OF INDUSTRIAL GAS COOKER
3.2 PICTORIAL DIAGRAM GAS COOKER
3.3 WORKING PRINCIPLE OF THE PROJECT
CHAPTER FOUR
4.1 ASSEMBLY AND TESTING
4.2 BURNER CONFIGURATION
4.3 TESTING THE CONFIGURATION
4.4 SELECTION OF COOKER
CHAPTER FIVE
5.1 CONCLUSION
5.2 RECOMMENDATION
5.3 REFERENCES
Design And Fabrication Of An Industrial Gas Cooker. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-fabrication-of-an-industrial-gas-cooker/
“Design And Fabrication Of An Industrial Gas Cooker.” UniTopics, https://www.unitopics.com/project/material/design-and-fabrication-of-an-industrial-gas-cooker/. Accessed 22 November 2024.
“Design And Fabrication Of An Industrial Gas Cooker.” UniTopics, Accessed November 22, 2024. https://www.unitopics.com/project/material/design-and-fabrication-of-an-industrial-gas-cooker/
Here’s a typical structure for Design And Fabrication Of An Industrial Gas Cooker research projects:
- The title page of Design And Fabrication Of An Industrial Gas Cooker should include the project title, your name, institution, and date.
- The abstract of Design And Fabrication Of An Industrial Gas Cooker should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Fabrication Of An Industrial Gas Cooker should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Fabrication Of An Industrial Gas Cooker, identifying gaps the study aims to fill.
- The methodology section of Design And Fabrication Of An Industrial Gas Cooker should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Fabrication Of An Industrial Gas Cooker research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Fabrication Of An Industrial Gas Cooker results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Fabrication Of An Industrial Gas Cooker study and restate its significance.
- List all the sources you cited in Design And Fabrication Of An Industrial Gas Cooker project, following a specific citation style (e.g., APA, MLA, Chicago).