Due to irregular power supply common in developing countries, as well as growing high cost of hydrocarbon, the need arises for the development of a double energy source that uses electricity and charcoal for stove. The double powered stove is a combination of components that make possible the use of alternative heat sources. This stove has two chambers – the upper and lower chamber. The upper chamber is powered by electricity whilst the lower chamber is powered charcoal. In the upper chamber is a heating element that generates and dissipates heat within the enclosure. The element is connected to a thermostat that regulates the rate of heat generation in the system. The heat required from the charcoal stove is supplied by the coal. The stove can be adapted for both domestic and industrial purposes and have been found very useful in homes.
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
1.2 OBJECTIVE OF THE PROJECT
1.3 IMPORTANCE OF OVEN
1.4 LIMITATION OF THE PROJECT
1.5 PURPOSE OF THE PROJECT
1.6 SIGNIFICANCE OF THE PROJECT
1.7 DELIMITATION OF THE PROJECT
1.8 PROJECT ORGANISATION
CHAPTER TWO
LITERATURE REVIEW
2.1 HISTORICAL BACKGROUND OF OVENS
2.2 REVIEW OF DIFFERENT TYPES OF OVENS
2.3 REVIEW OF CHARCOAL OVEN
2.4 TYPES OF CHARCOAL OVENS
2.5 TECHNICAL DETAILS OF CHARCOAL OVEN
CHAPTER THREE
3.1 DESIGN METHODOLOGY
3.2 PRINCIPLE OF OPERATION OF ELECTRIC AND GAS OVEN
3.3 MATERIALS AND METHODOLOGY FOR GAS OVEN
3.4 ELECTRIC OVEN BLOCK DIAGRAM
3.5 MATERIALS USED
3.6 DESIGN ANALYSIS
3.7 CHARCOAL OVEN METHOD OF CONSTRUCTION
3.8 PERFORMANCE TEST
CHAPTER FOUR
4.0 TEST AND RESULT ANALYSIS
4.1 CONSTRUCTION PROCEDURE AND TESTING
4.2 ASSEMBLING OF SECTIONS
4.3 TESTING OF SYSTEM OPERATION
4.4 TAKING CARE THE OVEN
4.5 TROUBLESHOOTING
CHAPTER FIVE
5.1 CONCLUSION
5.2 RECOMMENDATION
5.3 REFERENCES
Design And Fabrication Of An Electric – Charcoal Stove. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-fabrication-of-an-electric-charcoal-stove/
“Design And Fabrication Of An Electric – Charcoal Stove.” UniTopics, https://www.unitopics.com/project/material/design-and-fabrication-of-an-electric-charcoal-stove/. Accessed 19 September 2024.
“Design And Fabrication Of An Electric – Charcoal Stove.” UniTopics, Accessed September 19, 2024. https://www.unitopics.com/project/material/design-and-fabrication-of-an-electric-charcoal-stove/
Here’s a typical structure for Design And Fabrication Of An Electric – Charcoal Stove research projects:
- The title page of Design And Fabrication Of An Electric – Charcoal Stove should include the project title, your name, institution, and date.
- The abstract of Design And Fabrication Of An Electric – Charcoal Stove should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Fabrication Of An Electric – Charcoal Stove should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Fabrication Of An Electric – Charcoal Stove, identifying gaps the study aims to fill.
- The methodology section of Design And Fabrication Of An Electric – Charcoal Stove should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Fabrication Of An Electric – Charcoal Stove research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Fabrication Of An Electric – Charcoal Stove results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Fabrication Of An Electric – Charcoal Stove study and restate its significance.
- List all the sources you cited in Design And Fabrication Of An Electric – Charcoal Stove project, following a specific citation style (e.g., APA, MLA, Chicago).