Demand for plastic is increasing day by day which pose a tremendous threat to the environment. Pyrolysis process becomes an option to waste –to- energy technology deliver fuel to replace the fossil fuel. A few options have been considered for plastic waste management for recycling and energy cycling technique. As a result plastic waste conversion into energy causes energy developed through innovation advancement and extensive research. Design and fabrication of a pyrolysis reactor which can be used to convert the plastic into oil as an effort in finding environment friendly means of waste recycling by means of plastic pyrolysis. In this effort we design and develop a mini reactor setup for plastic pyrolysis to conversion plastic waste into fuel.
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF STUDY
1.2 PROBLEM STATEMENT
1.3 AIM AND OBJECTIVE OF THE PROJECT
1.4 SIGNIFICANCE OF THE PROJECT
1.5 SCOPE OF THE PROJECT
CHAPTER TWO
LITERATURE REVIEW
2.1 REVIEW OF BIOMASS PYROLYSIS
2.2 MECHANISM OF PYROLYSIS PROCESS
2.3 SOURCES OF BIOMASS AND THEIR PROPERTIES
2.4 REVIEW OF PYROLYSIS TECHNOLOGY
2.5 THE PRODUCTS OF PYROLYSIS PROCESS
2.6 REACTORS EMPLOYED IN THE PYROLYSIS PROCESS
2.7 REVIEW OF RELATED STUDIES
2.8 BIOFUELS
2.9 PYROLYSIS OILS
CHAPTER THREE
3.0 METHODOLOGY
3.1 SYSTEM OPERATING PRINCIPLE
3.2 SELECTION OF MATERIAL
3.3 DESIGN PROCEDURE
CHAPTER FOUR
4.1 FABRICATION AND ASSEMBLY
4.2 BURNING TEST OF PYROLYSIS OIL
CHAPTER FIVE
5.0 CONCLUSION, RECOMMENDATION AND REFERENCES
5.1 CONCLUSION
5.2 RECOMMENDATION
5.3 REFERENCES
Design And Fabrication Of A Pyrolysis Reactor. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-fabrication-of-a-pyrolysis-reactor/
“Design And Fabrication Of A Pyrolysis Reactor.” UniTopics, https://www.unitopics.com/project/material/design-and-fabrication-of-a-pyrolysis-reactor/. Accessed 22 November 2024.
“Design And Fabrication Of A Pyrolysis Reactor.” UniTopics, Accessed November 22, 2024. https://www.unitopics.com/project/material/design-and-fabrication-of-a-pyrolysis-reactor/
Here’s a typical structure for Design And Fabrication Of A Pyrolysis Reactor research projects:
- The title page of Design And Fabrication Of A Pyrolysis Reactor should include the project title, your name, institution, and date.
- The abstract of Design And Fabrication Of A Pyrolysis Reactor should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Fabrication Of A Pyrolysis Reactor should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Fabrication Of A Pyrolysis Reactor, identifying gaps the study aims to fill.
- The methodology section of Design And Fabrication Of A Pyrolysis Reactor should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Fabrication Of A Pyrolysis Reactor research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Fabrication Of A Pyrolysis Reactor results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Fabrication Of A Pyrolysis Reactor study and restate its significance.
- List all the sources you cited in Design And Fabrication Of A Pyrolysis Reactor project, following a specific citation style (e.g., APA, MLA, Chicago).