To contribute to the development of Engineering and Technology innovations. The research work carried out in this project will help greatly in that direction. We exphasised mainly on modern methods by which a refrigerator can be operated and maintained we also included the method used in design and fabrication, assembly and arriving at knowing the safety requirement.
During the process of production of this refrigerator, cost estimate is taken into consideration with durability of materials, portability of the product was also considered.
NOMENCLATURE
M = Mass
A = Area
S = Entropy
V = Volume
M = Mass Flow Rate
D = Diameter
G = Gravity
= Density
T = Temperature
H = Enthalpy Difference
Q = Heat Quantity
M = Latent Heat of Fusion
gr = Equivalent Load
L = Length
P = Pressure
U = Internal Energy
R = Thermal Conductivity
X = Thickness of Material
COP = Co-efficient of Performance
Q = Heat Transfer Per Area
HP = Horse Power
Vs = Swept Volume
AC = Alternative Current
C = Specific Heat
O = Gauge
Title Page
Letter of Transmittal
Release Page
Signature Page
Dedication
Acknowledgment
Abstract
Table of Contents
Chapter ONE
1.0 Introduction
Chapter TWO
2.0 literature review
2.1 The Reverse Carnot Cycle
2.2 Modification of the Ideal Cycle Vapour Compression Cycle
2.3 Condition of Refrigerants in Compressive Inlet
2.4 Definitions of Terms
Chapter THREE
3.0 Detailed Information Needed for the Construction/Consideration of the Principle
3.1 Safety Consideration
3.2 Unit Description
3.3 Methods of Construction and Procedures
3.4 Fitting of the Evaporator
3.5 Other Assembly
Chapter FOUR
4.0 Mobile Calculation and Analysis
4.1 Heat Leakage Through and Boundary
4.2 The Product Load
4.3 Co-efficient of Performance
Chapter FIVE
5.0 Defrosting
5.1 Analysis and Material Cost Value
5.2 Labour Cost
5.3 Recommendation
5.4 Complaints, Causes and Remedy
References
Design And Fabrication Of A Mobile Refrigerator. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-fabrication-of-a-mobile-refrigerator/
“Design And Fabrication Of A Mobile Refrigerator.” UniTopics, https://www.unitopics.com/project/material/design-and-fabrication-of-a-mobile-refrigerator/. Accessed 22 November 2024.
“Design And Fabrication Of A Mobile Refrigerator.” UniTopics, Accessed November 22, 2024. https://www.unitopics.com/project/material/design-and-fabrication-of-a-mobile-refrigerator/
Here’s a typical structure for Design And Fabrication Of A Mobile Refrigerator research projects:
- The title page of Design And Fabrication Of A Mobile Refrigerator should include the project title, your name, institution, and date.
- The abstract of Design And Fabrication Of A Mobile Refrigerator should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Fabrication Of A Mobile Refrigerator should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Fabrication Of A Mobile Refrigerator, identifying gaps the study aims to fill.
- The methodology section of Design And Fabrication Of A Mobile Refrigerator should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Fabrication Of A Mobile Refrigerator research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Fabrication Of A Mobile Refrigerator results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Fabrication Of A Mobile Refrigerator study and restate its significance.
- List all the sources you cited in Design And Fabrication Of A Mobile Refrigerator project, following a specific citation style (e.g., APA, MLA, Chicago).