ABSTRACT
This sound controlled lights circuit design is used to control the brightness of the lights attached to it in sync with the sound that is being capsulated by its microphone. This electronic circuit design is very common in disco houses, bars, parties.
Usually, sound controlled lights are just connected in parallel with the loudspeakers. The power supply part is on the left of the electric microphone amplifier and the light controller part is on the right. The capacitors C2 and C3 are the capacitive voltage divider and reduces the power supply level. Diodes D1 and D2 rectify the positive swing of the AC voltage. The network composed of L1 and C1 protects the power line from voltages surges. In this circuit design, an electric microphone is being used. Take note that there are 2 types of electric microphone. The first type has three pins for power, ground, and output. The second type has only two pins. The second type is used for this circuit.
TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
- PURPOSE OF THE PROJECT
- AIM OF THE PROJECT
- OBJECTIVE OF THE PROJECT
- PURPOSE OF THE PROJECT
- LIMITATION OF THE PROJECT
- ADVANTAGES OF THE PROJECT
- PROBLEM OF THE PROJECT
- APPLICATION OF THE PROJECT
- RESEARCH QUESTION
- PROJECT ORGANISATION
CHAPTER TWO
LITERATURE REVIEW
- OVERVIEW OF THE STUDY
- REVIEW OF THE RELATED STUDY
CHAPTER THREE
3.0 CONSTRUCTION METHODOLOGY
3.1 BASIC OF THE SYSTEM
3.2 BLOCK DIAGRAM OF THE SYSTEM
3.3 SYSTEM OPERATION
3.4 CIRCUIT DIAGRAM
3.5 CIRCUIT DESCRIPTION
3.6 DESCRIPTION OF COMPONENTS USED
3.7 POWER SUPPLY UNIT
CHAPTER FOUR
4.0 TESTING AND RESULTS
- CONSTRUCTION PROCEDURE AND TESTING
- INSTALLATION OF THE COMPLET DESIGN
- ASSEMBLING OF SECTIONS
- TESTING OF SYSTEM OPERATION
- COST ANALYSIS
CHAPTER FIVE
- CONCLUSION
- RECOMMENDATION
- REFERENCES
Design And Construction Of Sound Controlled Lights Circuit. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-construction-of-sound-controlled-lights-circuit/
“Design And Construction Of Sound Controlled Lights Circuit.” UniTopics, https://www.unitopics.com/project/material/design-and-construction-of-sound-controlled-lights-circuit/. Accessed 23 November 2024.
“Design And Construction Of Sound Controlled Lights Circuit.” UniTopics, Accessed November 23, 2024. https://www.unitopics.com/project/material/design-and-construction-of-sound-controlled-lights-circuit/
Here’s a typical structure for Design And Construction Of Sound Controlled Lights Circuit research projects:
- The title page of Design And Construction Of Sound Controlled Lights Circuit should include the project title, your name, institution, and date.
- The abstract of Design And Construction Of Sound Controlled Lights Circuit should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Construction Of Sound Controlled Lights Circuit should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Construction Of Sound Controlled Lights Circuit, identifying gaps the study aims to fill.
- The methodology section of Design And Construction Of Sound Controlled Lights Circuit should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Construction Of Sound Controlled Lights Circuit research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Construction Of Sound Controlled Lights Circuit results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Construction Of Sound Controlled Lights Circuit study and restate its significance.
- List all the sources you cited in Design And Construction Of Sound Controlled Lights Circuit project, following a specific citation style (e.g., APA, MLA, Chicago).