This project work deals on the design and construction of an IR based remote control for an electronic/electrical device say electric lamp with the aim of switching on/off of the lamp at discretion and from a distance. It also eliminates the inconveniences associated with manual switching of bed lamps. This electronic system is designed in two functional units; the transmitter and the receiver using IR communication wave band. The transmitter is a hand-held remote control while the receiver consists of a tuned radio frequency receiver, clock generator, delay circuit, flip-flop and a driver circuitry and electromagnetic relay which actuates the load (lamp). When the remote control button is pressed, the lamp comes ON and remains ON until the remote is pressed again – it goes OFF. Many advantages are accredited to this design in terms of robust, durability, cost effectiveness and components availability. The result being the simple design of a system easy to operate and maintain. A miniaturized design of it will be a reliable, robust and rugged consumer electronics that will sell like a German burger.
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
1.1 INTRODUCTION
1.2 BACKGROUND OF THE PROJECT
1.3 GENERAL DESCRIPTION OF THE PROJECT
1.4 OBJECTIVES OF THE PROJECT
1.5 AIM OF THE PROJECT
1.6 SIGNIFICANCE OF THE PROJECT
1.7 APPLICATION OF THE PROJECT
1.8 PROBLEM OF THE PROJECT
1.9 SCOPE OF THE PROJECT
1.10 PROJECT REPORT ORGANIZATION
CHAPTER TWO
LITERATURE REVIEW
2.1 REMOTE CONTROL TECHNOLOGY
2.2 INFRARED, LINE OF SIGHT AND OPERATING ANGLE
2.3 REMOTE CONTROL TECHNOLOGIES
CHAPTER THREE
3.0 METHODOLOGY
3.1 CIRCUIT DIAGRAM
3.2 TRANSMITTER SECTION
3.3 RECEIVER SECTION
3.4 COMPONENT DESCRIPTION
CHAPTER FOUR
4.1 RESULT ANALYSIS
4.2 CONSTRUCTION PROCEDURE AND TESTING ANALYSIS
4.3 CASING AND PACKAGING
4.4 INSTALLATION OF THE COMPLETED DESIGN
4.5 TESTING
4.6 ECONOMIC OF THE PROJECT
4.7 PROJECT EVALUATION
CHAPTER FIVE
5.1 CONCLUSION
5.2 RECOMMENDATION
5.3 REFERENCES
Design And Construction Of IR Remote Controlled Light. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-construction-of-ir-remote-controlled-light/
“Design And Construction Of IR Remote Controlled Light.” UniTopics, https://www.unitopics.com/project/material/design-and-construction-of-ir-remote-controlled-light/. Accessed 19 September 2024.
“Design And Construction Of IR Remote Controlled Light.” UniTopics, Accessed September 19, 2024. https://www.unitopics.com/project/material/design-and-construction-of-ir-remote-controlled-light/
Here’s a typical structure for Design And Construction Of IR Remote Controlled Light research projects:
- The title page of Design And Construction Of IR Remote Controlled Light should include the project title, your name, institution, and date.
- The abstract of Design And Construction Of IR Remote Controlled Light should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Construction Of IR Remote Controlled Light should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Construction Of IR Remote Controlled Light, identifying gaps the study aims to fill.
- The methodology section of Design And Construction Of IR Remote Controlled Light should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Construction Of IR Remote Controlled Light research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Construction Of IR Remote Controlled Light results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Construction Of IR Remote Controlled Light study and restate its significance.
- List all the sources you cited in Design And Construction Of IR Remote Controlled Light project, following a specific citation style (e.g., APA, MLA, Chicago).