This project which consists of four chapters deals extensively with the design and construction of a battery charger which is capable charging a 12 volts, battery.
The first chapter which is the introductory chapter goes a long way in defining the battery charger and explaining of the mode of operation.
The second chapter went further to explain each component part of the battery charger. This ranges from:-
1. The transformer
2. The rectifier circuit
3. The filtering stage
4. Voltage regulation
5. Comparator
6. Thyristor
7. Resistor
8. Diode
9. Relay
10. Zener diode and
11. Light emitting diode (LED)
The third chapter explains more about the Testing Sensing and switching processes in the charger. It also gave the list of components and the circuit diagram of the battery charger.
The concluding chapter being fourth, tells us more about the circuit arrangements and the construction of casing and finally the overall cost analysis.
Title Page
Approval Page
Dedication
Acknowledgement
Abstract
Chapter One
1.1 Introduction
Chapter Two
2.1 Block Diagram Of Battery Charger
2.2 Transformer
2.3 Ac To Dc Converter
2.4 Filtering
2.5 Voltage Regulation
2.6 Comparator
2.7 Thyristor
2.8 Resistor
2.9 Diode
2.10 Relay
2.11 Zener Diode
Chapter Three
3.1 Network Synthesis And Testing
3.2 Power Supply
3.3 Sensing And Switching Circuit
3.4 Battery Condition Test
3.5 List Of Component Values
Chapter Four
4.1 Conclusion
4.2 Cost Analysis
Bibliography
Design And Construction Of Battery Charger. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-construction-of-battery-charger/
“Design And Construction Of Battery Charger.” UniTopics, https://www.unitopics.com/project/material/design-and-construction-of-battery-charger/. Accessed 19 September 2024.
“Design And Construction Of Battery Charger.” UniTopics, Accessed September 19, 2024. https://www.unitopics.com/project/material/design-and-construction-of-battery-charger/
Here’s a typical structure for Design And Construction Of Battery Charger research projects:
- The title page of Design And Construction Of Battery Charger should include the project title, your name, institution, and date.
- The abstract of Design And Construction Of Battery Charger should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Construction Of Battery Charger should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Construction Of Battery Charger, identifying gaps the study aims to fill.
- The methodology section of Design And Construction Of Battery Charger should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Construction Of Battery Charger research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Construction Of Battery Charger results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Construction Of Battery Charger study and restate its significance.
- List all the sources you cited in Design And Construction Of Battery Charger project, following a specific citation style (e.g., APA, MLA, Chicago).