The very fundamental reasons behind this project assignment is to expose student to the very important aspect of private and independent research work not only theories but also subsequent translation of the theoretical research work into a particular function system.
The project construction of automatic fence light controller has been done primarily as a photo type design it could be further modified suit the situation where it will be used e.g when used to activate an alarm the led could be further modified to suit the situation where it will be used e.g when used to activate an alarm the led could be replaced with a relay and feedback resistor removed (for greater sensitivity)
Title Page
Approval Page
Abstract
Table Of Contents
Acknowledgement
Dedication
Chapter One
1.1 Introduction
Chapter Two
2.1 Description Of Components Used
2.2 Integrated
2.3 Transistor
2.4 Diode
2.5 Resistor
2.6 Variable Resistor (Preset)
2.7 Capacitor
2.8 Light Dependent Resistor (Ldr)
2.9 Relay
2.10 Transformer
Chapter Three
3.1 Circuit Drawing Of The Automatic Fence Light Controller
3.2 Achieve Function Of The Alto Fence Light Controller
3.3 Rectification Stage Of The Circuit
Chapter Four
4.1 Principles Of Operation Of The Automatic Fence Light Controller
4.2 Project Component /Materials Cost & Packaging
Chapter Five
5.1 Test Measurement And Observation
5.2 Conclusion And Recommendation
References.
Design And Construction Of Automatic Fence Light Controller. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-construction-of-automatic-fence-light-controller/
“Design And Construction Of Automatic Fence Light Controller.” UniTopics, https://www.unitopics.com/project/material/design-and-construction-of-automatic-fence-light-controller/. Accessed 19 September 2024.
“Design And Construction Of Automatic Fence Light Controller.” UniTopics, Accessed September 19, 2024. https://www.unitopics.com/project/material/design-and-construction-of-automatic-fence-light-controller/
Here’s a typical structure for Design And Construction Of Automatic Fence Light Controller research projects:
- The title page of Design And Construction Of Automatic Fence Light Controller should include the project title, your name, institution, and date.
- The abstract of Design And Construction Of Automatic Fence Light Controller should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Construction Of Automatic Fence Light Controller should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Construction Of Automatic Fence Light Controller, identifying gaps the study aims to fill.
- The methodology section of Design And Construction Of Automatic Fence Light Controller should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Construction Of Automatic Fence Light Controller research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Construction Of Automatic Fence Light Controller results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Construction Of Automatic Fence Light Controller study and restate its significance.
- List all the sources you cited in Design And Construction Of Automatic Fence Light Controller project, following a specific citation style (e.g., APA, MLA, Chicago).