ABSTRACT
The circuit continuously monitors the leakage from an electronics gadget by sensing the potential in its body. When there is leakage from the body, the potential exists across the neutral end and the body of the gadget, which charges capacitor C1 through diode D1 and resistor R1. When the voltage across capacitor C1 exceeds the break-down potential of DIAC1 (DB3), it starts conducting and the capacitor discharges through the buzzer as well as LED1 quickly. This discharge energy makes LED1 flash and piezobuzzer sound momentarily. As long as there is leakage from the body of the gadget, there is intermittent warning from the buzzer as well as from the LED.
TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
- PURPOSE OF THE PROJECT
- AIM OF THE PROJECT
- OBJECTIVE OF THE PROJECT
- PURPOSE OF THE PROJECT
- LIMITATION OF THE PROJECT
- ADVANTAGES OF THE PROJECT
- PROBLEM OF THE PROJECT
- APPLICATION OF THE PROJECT
- RESEARCH QUESTION
- PROJECT ORGANISATION
CHAPTER TWO
LITERATURE REVIEW
- OVERVIEW OF THE STUDY
- REVIEW OF THE RELATED STUDY
CHAPTER THREE
3.0 CONSTRUCTION METHODOLOGY
3.1 BASIC OF THE SYSTEM
3.2 BLOCK DIAGRAM OF THE SYSTEM
3.3 SYSTEM OPERATION
3.4 CIRCUIT DIAGRAM
3.5 CIRCUIT DESCRIPTION
3.6 DESCRIPTION OF COMPONENTS USED
3.7 POWER SUPPLY UNIT
CHAPTER FOUR
4.0 TESTING AND RESULTS
- CONSTRUCTION PROCEDURE AND TESTING
- INSTALLATION OF THE COMPLET DESIGN
- ASSEMBLING OF SECTIONS
- TESTING OF SYSTEM OPERATION
- COST ANALYSIS
CHAPTER FIVE
- CONCLUSION
- RECOMMENDATION
- REFERENCES
Design And Construction Of An Shock Warning Circuit. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-construction-of-an-shock-warning-circuit/
“Design And Construction Of An Shock Warning Circuit.” UniTopics, https://www.unitopics.com/project/material/design-and-construction-of-an-shock-warning-circuit/. Accessed 20 September 2024.
“Design And Construction Of An Shock Warning Circuit.” UniTopics, Accessed September 20, 2024. https://www.unitopics.com/project/material/design-and-construction-of-an-shock-warning-circuit/
Here’s a typical structure for Design And Construction Of An Shock Warning Circuit research projects:
- The title page of Design And Construction Of An Shock Warning Circuit should include the project title, your name, institution, and date.
- The abstract of Design And Construction Of An Shock Warning Circuit should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Construction Of An Shock Warning Circuit should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Construction Of An Shock Warning Circuit, identifying gaps the study aims to fill.
- The methodology section of Design And Construction Of An Shock Warning Circuit should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Construction Of An Shock Warning Circuit research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Construction Of An Shock Warning Circuit results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Construction Of An Shock Warning Circuit study and restate its significance.
- List all the sources you cited in Design And Construction Of An Shock Warning Circuit project, following a specific citation style (e.g., APA, MLA, Chicago).