This work deals extensively with the design and construction of an electronic dice display (EOD) with audio unit. The device displays the of a hudo dice in numberical form and also produces sound as it displays the number.
The device works with principle of chance employee by ludo game players. The output of the display is usually very rapid that the player does actually sex the number when the device is switched on so that it will purely be a game of chance. When the off key is pressed, a patellar number is displayed and this number is the number, the player got.
The operation of the device starts by the generation of a pulse frequency. The pulse frequency (square wave signal) generated by times (555 times) by connecting in an instable multibibrator. The output from this timer is used in clocking the binary counter (mod to counter) but this counter is biased to count just from zero through six (0-6) as we have in a lodo game dice. To achieve this bias in the mod 10 counter, the output from Qo, Q1 and Q2 were connected to the riset prins so that once the counter finishes the count of six or goes back to zero.
The result from the binary counter is then fed to the decoder driver before connecting it to seven segment so that the decoder will be able to covert the binary values to the decinal values that are being used in the ludo game dice. The seven segment then displays the numbers by lighting the diodes that make up that particular value.
This device is being regulated by a latch (4-edge triggered flipflope) which has two switches, one is used for putting the power supply and the other two push switches for the working of the dice display.
Title page
Approval page
Dedication
Acknowledgement
Abstract
Organization of work
List of figures
List of table
Table of content
CHAPTER ONE
INTRODUCTION 1
1.0 Statement of problem 1
1.1 purpose of study 2
1.2 Aims and objectives 2
1.3 Scope 3
1.4 Limitations 3
1.5 Definitions of terms 5
CHAPTER TWO
Literature Review 9
CHAPTER THREE
Description and Analysis of the Existing System 15
Organization structure 16
Objectives of the existing system 17
CHAPTER FOUR
Design of the New System 18
Output specification and design 20
Input specification and design 29
File design 38
Procedure chart 39
System flow chart 41
System requirement 42
CHAPTER FIVE
Implementation 47
Program flowchart 49
CHAPTER SIX
Documentation 51
CHAPTER SEVEN
Recommendation and Conclusion 53
7.1 Recommendation 53
7.2 Conclusion 53
Reference 55
Design And Construction Of An Electronic Dice Display With Audio Unit. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-construction-of-an-electronic-dice-display-with-audio-unit/
“Design And Construction Of An Electronic Dice Display With Audio Unit.” UniTopics, https://www.unitopics.com/project/material/design-and-construction-of-an-electronic-dice-display-with-audio-unit/. Accessed 22 November 2024.
“Design And Construction Of An Electronic Dice Display With Audio Unit.” UniTopics, Accessed November 22, 2024. https://www.unitopics.com/project/material/design-and-construction-of-an-electronic-dice-display-with-audio-unit/
Here’s a typical structure for Design And Construction Of An Electronic Dice Display With Audio Unit research projects:
- The title page of Design And Construction Of An Electronic Dice Display With Audio Unit should include the project title, your name, institution, and date.
- The abstract of Design And Construction Of An Electronic Dice Display With Audio Unit should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Construction Of An Electronic Dice Display With Audio Unit should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Construction Of An Electronic Dice Display With Audio Unit, identifying gaps the study aims to fill.
- The methodology section of Design And Construction Of An Electronic Dice Display With Audio Unit should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Construction Of An Electronic Dice Display With Audio Unit research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Construction Of An Electronic Dice Display With Audio Unit results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Construction Of An Electronic Dice Display With Audio Unit study and restate its significance.
- List all the sources you cited in Design And Construction Of An Electronic Dice Display With Audio Unit project, following a specific citation style (e.g., APA, MLA, Chicago).