Sometimes we forget to switch off the bathroom light and it remains on unnoticed for long periods. This circuit solves the problem of electricity wastage by switching off the lamp automatically after 30 minutes once it is switched on. The back-up LED lamp provided in the circuit turns on for three minutes when mains fails. This is helpful especially when you are taking a shower at night.
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER ONE
INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
1.2 OBJECTIVE OF THE PROJECT
1.3 SCOPE OF THE PROJECT
1.4 SIGNIFICANCE OF THE PROJECT
1.5 LIMITATION OF THE PROJECT
1.6 APPLICATION OF THE PROJECT
1.7 PROJECT ORGANISATION
CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 OVERVIEW OF 555 TIMER IC
2.2 HISTORICAL BACKGROUND OF 555 TIMER
2.3 DESIGN OF 555 TIMERS
2.4 PIN DIAGRAM OF 555 TIMERS
2.5 DESCRIPTION OF MAJOR COMPONENTS USED
CHAPTER THREE
3.0 CONSTRUCTION
3.1 BASIC DESIGNS OF THE SYSTEM
3.2 BLOCK DIAGRAM OF THE SYSTEM
3.3 DESCRIPTION OF THE BLOCK UNIT
3.4 SYSTEM CIRCUIT DIAGRAM
3.5 CIRCUIT OPERATION
CHAPTER FOUR
RESULT ANALYSIS
4.0 CONSTRUCTION PROCEDURE AND TESTING
4.1 CASING AND PACKAGING
4.2 ASSEMBLING OF SECTIONS
4.3 TESTING OF SYSTEM OPERATION
4.4 COST ANALYSIS
CHAPTER FIVE
5.1 CONCLUSION
5.2 RECOMMENDATION
5.3 REFERENCES
Design And Construction Of An Automatic Bathroom Light With Back-Up Lamp. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-construction-of-an-automatic-bathroom-light-with-back-up-lamp/
“Design And Construction Of An Automatic Bathroom Light With Back-Up Lamp.” UniTopics, https://www.unitopics.com/project/material/design-and-construction-of-an-automatic-bathroom-light-with-back-up-lamp/. Accessed 22 November 2024.
“Design And Construction Of An Automatic Bathroom Light With Back-Up Lamp.” UniTopics, Accessed November 22, 2024. https://www.unitopics.com/project/material/design-and-construction-of-an-automatic-bathroom-light-with-back-up-lamp/
Here’s a typical structure for Design And Construction Of An Automatic Bathroom Light With Back-Up Lamp research projects:
- The title page of Design And Construction Of An Automatic Bathroom Light With Back-Up Lamp should include the project title, your name, institution, and date.
- The abstract of Design And Construction Of An Automatic Bathroom Light With Back-Up Lamp should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Construction Of An Automatic Bathroom Light With Back-Up Lamp should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Construction Of An Automatic Bathroom Light With Back-Up Lamp, identifying gaps the study aims to fill.
- The methodology section of Design And Construction Of An Automatic Bathroom Light With Back-Up Lamp should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Construction Of An Automatic Bathroom Light With Back-Up Lamp research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Construction Of An Automatic Bathroom Light With Back-Up Lamp results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Construction Of An Automatic Bathroom Light With Back-Up Lamp study and restate its significance.
- List all the sources you cited in Design And Construction Of An Automatic Bathroom Light With Back-Up Lamp project, following a specific citation style (e.g., APA, MLA, Chicago).