ABSTRACT
This work is on an alcohol sensing system that measures alcohol intake, displays percentage of alcohol and also sounds an alarm if it is above a particular threshold. Here we use an alcohol sensor circuit along with LCD display and a buzzer alarm. Our system first uses the alcohol sensor in order to detect alcohol. The sensor provides analog output. This analog output is now provided to the microcontroller for further processing. Based on the input the microcontroller calculates the percentage of alcohol and displays the same on an LCD display. It also sounds an alarm if the amount of alcohol exceeds a particular amount. Our system thus allows measuring amount of alcohol and then displaying percentage of alcohol measured. Also a alarm is sounded that indicates that measured alcohol is above a particular percentage.
CHAPTER ONE
1.0 INTRODUCTION
The Nigerian government has been advising its citizens not to drink and drive for decades, but for the first time, it may be able to physically stop you from getting behind the wheel while hammered.
The main purpose behind this project is “Drunk driving detection”. Now a days, many accidents are happening because of the alcohol consumption of the driver or the person who is driving the vehicle. Thus Drunk driving is a major reason of accidents in almost all countries all over the world. Alcohol Detector in Car project is designed for the safety of the people seating inside the car. Alcohol breath analyzer project should be fitted / installed inside the vehicle.
The main unit of this project is an “Alcohol sensor”. If the person inside car has consumed alcohol then it is detected by the sensor. Sensor gives this signal to a comparative IC. The output of compactor is connected to the microcontroller. Microcontroller is the heart of this project. It is the CPU of the complete circuit. Micro-controller gives high pulse to the buzzer circuit and the buzzer is turned on. At the same time a relay is turned off. Due to this the ignition of the car is deactivated.
1.2 OBJECTIVE OF THE PROJECT
The objective of this work is design a Drunken driving detection device, which detects the percentage of alcohol and displays the same on an LCD display. It also sounds an alarm if the amount of alcohol exceeds a particular amount.
1.3 PURPOSE OF THE PROJECT
The main purpose behind this project is “Drunk driving detection”. Thus Drunk driving is a major reason of accidents in almost all countries all over the world. Alcohol Detector in Car project is designed for the safety of the people seating inside the car.
1.4 APPLICATIONS OF THE PROJECT
Applications of Alcohol Detector in Car:
1) “Alcohol Detector project” can be used in the various vehicles for detecting whether the driver has consumed alcohol or not.
2) Breathing analyses project can also be used in various companies or organization to detect alcohol consumption of employees. Alcohol detection system in an automobile is a must feature which every cab or bus should have.
1.5 SIGNIFICANCE OF THE PROJECT
“Alcohol Detection System in Cars” provides an automatic safety system for cars and other vehicles as well.
The sensors can also aid an officer in the detection of alcohol during a stop, not to replace other more reliable and effective testing methods. This equipment helps provide law enforcement with tools to develop initial suspicion of someone breaking the law. Because they lack the precision of other tests and can detect alcohol from sources other than the suspected impaired driver
Design And Construction Of An Alcohol Sensing Display With Alarm. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-construction-of-an-alcohol-sensing-display-with-alarm/
“Design And Construction Of An Alcohol Sensing Display With Alarm.” UniTopics, https://www.unitopics.com/project/material/design-and-construction-of-an-alcohol-sensing-display-with-alarm/. Accessed 22 November 2024.
“Design And Construction Of An Alcohol Sensing Display With Alarm.” UniTopics, Accessed November 22, 2024. https://www.unitopics.com/project/material/design-and-construction-of-an-alcohol-sensing-display-with-alarm/
Here’s a typical structure for Design And Construction Of An Alcohol Sensing Display With Alarm research projects:
- The title page of Design And Construction Of An Alcohol Sensing Display With Alarm should include the project title, your name, institution, and date.
- The abstract of Design And Construction Of An Alcohol Sensing Display With Alarm should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Construction Of An Alcohol Sensing Display With Alarm should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Construction Of An Alcohol Sensing Display With Alarm, identifying gaps the study aims to fill.
- The methodology section of Design And Construction Of An Alcohol Sensing Display With Alarm should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Construction Of An Alcohol Sensing Display With Alarm research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Construction Of An Alcohol Sensing Display With Alarm results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Construction Of An Alcohol Sensing Display With Alarm study and restate its significance.
- List all the sources you cited in Design And Construction Of An Alcohol Sensing Display With Alarm project, following a specific citation style (e.g., APA, MLA, Chicago).