Wind results from air in motion. Air in motion arises from a pressure gradient. Wind can be broadly classified as “planetary” and “local”. Planetary winds are caused by greater solar heating of the earth`s surface near the equator than near the northern or southern poles. This cause warm tropical air to rise and flow through the upper atmosphere towards the poles and cold air from the poles to flow back to the equator nearer to earth’s surface. The power in the wind can be computed by using the concepts of kinetics. The wind mill works on the principle of converting kinetic energy of the wind to mechanical energy using wind turbine. Wind turbines are made to rotate with the blowing wind and accordingly electricity been generated.
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
1.2 PROBLEM STATEMENT
1.3 OBJECTIVE OF THE PROJECT
1.4 SCOPE OF THE PROJECT
1.5 SIGNIFICANCE OF THE PROJECT
1.6 LIMITATION OF THE PROJECT
1.7 APPLICATION OF THE PROJECT
1.8 TYPES OF WIND TURBINE
CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 INTRODUCTION
2.2 OVERVIEW OF THE STUDY
2.3 BRIEF HISTORY OF WIND MILLS
2.4 THE AMERICAN WIND TURBINE ( HALLADAY DESIGN )
2.5 INITIAL STAGES OF ELECTRICAL POWER PRODUCTION FROM WIND
2.6 THE NEED FOR DEVELOPMENT OF RENEWABLE ENERGY SOURCES
2.7 BASIC CONCEPTS WIND TURBINES
CHAPTER THREE
3.0 CONSTRUCTION METHODOLOGY
3.1 BASICS OF THE SYSTEM
3.2 INDUCTION GENERATOR THEORY
3.3 INDUCTION MOTOR/GENERATOR THEORY
3.4 INDUCTION GENERATOR/MOTOR MECHANICAL DESIGN
3.5 CONVERTER CIRCUITS
3.6 SETUP DIAGRAM
CHAPTER FOUR
4.0 TESTING AND RESULTS
4.1 TESTING OF 1000 W ELECTRICAL GENERATOR
4.2 SAFETY HAZARDS
4.3 TESTING METHOD
4.4 DATA COLLECTION: RESULTS: DISCUSSION
CHAPTER FIVE
5.1 CONCLUSION
5.2 RECOMMENDATION
5.3 FUTURE WORK
REFERENCES
Design And Construction Of A Wind Power Generation. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-construction-of-a-wind-power-generation/
“Design And Construction Of A Wind Power Generation.” UniTopics, https://www.unitopics.com/project/material/design-and-construction-of-a-wind-power-generation/. Accessed 21 November 2024.
“Design And Construction Of A Wind Power Generation.” UniTopics, Accessed November 21, 2024. https://www.unitopics.com/project/material/design-and-construction-of-a-wind-power-generation/
Here’s a typical structure for Design And Construction Of A Wind Power Generation research projects:
- The title page of Design And Construction Of A Wind Power Generation should include the project title, your name, institution, and date.
- The abstract of Design And Construction Of A Wind Power Generation should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Construction Of A Wind Power Generation should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Construction Of A Wind Power Generation, identifying gaps the study aims to fill.
- The methodology section of Design And Construction Of A Wind Power Generation should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Construction Of A Wind Power Generation research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Construction Of A Wind Power Generation results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Construction Of A Wind Power Generation study and restate its significance.
- List all the sources you cited in Design And Construction Of A Wind Power Generation project, following a specific citation style (e.g., APA, MLA, Chicago).