Design And Construction Of A Water Overflow Indicator Circuit

ABSTRACT

This Simple circuit can monitor overflow of water from the Overhead tank. The sensor placed close to the lid of the overhead tank always monitor the presence of water coming through the lid and gives a music tone when it senses the over flow. ROM IC UM66 is used to generate melody tone. Sensor can be a small piece of common PCB with line tracks. Points A and B are connected to two adjacent tracks using thin plastic wire. Normally T1 is not conducting and no current flows through it. This keeps T2 also non conducting. When water falls on the sensor, electrical conductivity occurs between points A and B though water. This gives base bias to T1 and it conducts to charge C1. When the voltage level in C1 increases, T2 gets base bias and conducts. It gives power to the melody generator IC UM66. Since UM 66 requires 3 volts, Zener diode ZD is used to regulate the supply of UM 66 to 3 volts. Output pulses from UM 66 are amplified by T3 and the Speaker gives Music tone. The music tone continues till the overflow water ceases.

TABLE OF CONTENTS

COVER PAGE

TITLE PAGE

APPROVAL PAGE

DEDICATION

ACKNOWELDGEMENT

ABSTRACT

CHAPTER ONE

1.0      INTRODUCTION

1.1      BACKGROUND OF THE PROJECT

  • PURPOSE OF THE PROJECT
  • AIM OF THE PROJECT
  • OBJECTIVE OF THE PROJECT
  • PURPOSE OF THE PROJECT
  • LIMITATION OF THE PROJECT
  • ADVANTAGES OF THE PROJECT
  • PROBLEM OF THE PROJECT
  • APPLICATION OF THE PROJECT
  • RESEARCH QUESTION
  • PROJECT ORGANISATION

CHAPTER TWO

LITERATURE REVIEW

  • OVERVIEW OF THE STUDY
  • REVIEW OF THE RELATED STUDY

 

CHAPTER THREE

3.0     CONSTRUCTION METHODOLOGY

3.1      BASIC OF THE SYSTEM

3.2     BLOCK DIAGRAM OF THE SYSTEM

3.3      SYSTEM OPERATION

3.4      CIRCUIT DIAGRAM

3.5      CIRCUIT DESCRIPTION

3.6     DESCRIPTION OF COMPONENTS USED

3.7      POWER SUPPLY UNIT

CHAPTER FOUR

4.0      TESTING AND RESULTS

  • CONSTRUCTION PROCEDURE AND TESTING
  • INSTALLATION OF THE COMPLET DESIGN
  • ASSEMBLING OF SECTIONS
  • TESTING OF SYSTEM OPERATION
  • COST ANALYSIS

CHAPTER FIVE

  • CONCLUSION
  • RECOMMENDATION
  • REFERENCES

KEYWORD: water overflow indicator circuit, water level indicator circuit diagram with alarm, simple water level indicator with buzzer, water level indicator mini project, water level indicator project report, water level indicator sensor, design and construction of water level indicator, how to make a simple water level indicator alarm at home pdf, water tank overflow liquid level sensor alarm circuit

 

APA

Design And Construction Of A Water Overflow Indicator Circuit. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-construction-of-a-water-overflow-indicator-circuit/

MLA

“Design And Construction Of A Water Overflow Indicator Circuit.” UniTopics, https://www.unitopics.com/project/material/design-and-construction-of-a-water-overflow-indicator-circuit/. Accessed 10 November 2024.

Chicago

“Design And Construction Of A Water Overflow Indicator Circuit.” UniTopics, Accessed November 10, 2024. https://www.unitopics.com/project/material/design-and-construction-of-a-water-overflow-indicator-circuit/

WORK DETAILS

Here’s a typical structure for Design And Construction Of A Water Overflow Indicator Circuit research projects:

  • The title page of Design And Construction Of A Water Overflow Indicator Circuit should include the project title, your name, institution, and date.
  • The abstract of Design And Construction Of A Water Overflow Indicator Circuit should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
  • The introduction of Design And Construction Of A Water Overflow Indicator Circuit should provide the background information, outline the research problem, and state the objectives and significance of the study.
  • Review existing research related to Design And Construction Of A Water Overflow Indicator Circuit, identifying gaps the study aims to fill.
  • The methodology section of Design And Construction Of A Water Overflow Indicator Circuit should describe the research design, data collection methods, and analytical techniques used.
  • Present the findings of the Design And Construction Of A Water Overflow Indicator Circuit research study using tables, charts, and graphs to illustrate key points.
  • Interpret Design And Construction Of A Water Overflow Indicator Circuit results, discussing their implications, limitations, and potential areas for future research.
  • Summarize the main findings of the Design And Construction Of A Water Overflow Indicator Circuit study and restate its significance.
  • List all the sources you cited in Design And Construction Of A Water Overflow Indicator Circuit project, following a specific citation style (e.g., APA, MLA, Chicago).
WORK DETAILS