ABSTRACT
This single-IC based TV pattern generator is useful for fault finding in TV sets. You can correct the alignment of the timing circuits of the TV set with the help of this circuit. The vertical stripes (bars) produced by the pattern generator on the TV screen help you align the vertical scanning synchronisation circuit of the receiver.
To test the TV set, you need to connect the video and audio outputs of the circuit to the respective inputs of the TV set one by one. If the video section of the TV set is working the circuit generates vertical white lines on the TV screen, and if the audio section is working you hear sound from the TV’s speakers. You can also adjust the width of vertical lines.
The circuit uses hex Schmitt inverter IC CD40106 (IC1). NOT gate N1 generates horizontally synchronised (Hsync) pulses for the PAL video signal.
TABLE OF CONTENTS
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
1.2 AIM OF THE PROJECT
1.3 OBJECTIVE OF THE PROJECT
1.4 SIGNIFICANCE OF THE PROJECT
1.5 PURPOSE OF THE PROJECT
1.6 APPLICATION OF THE PROJECT
1.7 ADVANTAGES OF THE PROJECT
1.8 PROBLEM/LIMITATION OF THE PROJECT
1.9 PROJECT ORGANISATION
CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 REVIEW OF RELATED STUDIES
2.2 REVIEW OF RELATED TERMS
CHAPTER THREE
3.0 CONSTRUCTION METHODOLOGY
3.1 SYSTEM CIRCUIT DIAGRAM
3.2 SYSTEM OPERATION
3.3 CIRCUIT DESCRIPTION
3.4 SYSTEM CIRCUIT DIAGRAM
3.5 CIRCUIT OPERATION
3.6 IMPORTANCE AND FUNCTION OF THE MAJOR COMPONENTS USED IN THIS CIRCUIT
3.7 POWER SUPPLY UNIT
CHAPTER FOUR
RESULT ANALYSIS
4.0 CONSTRUCTION PROCEDURE AND TESTING
4.1 CASING AND PACKAGING
4.2 ASSEMBLING OF SECTIONS
4.3 TESTING
4.4.1 PRE-IMPLEMENTATION TESTING
4.4.2 POST-IMPLEMENTATION TESTING
4.5 RESULT
4.6 COST ANALYSIS
4.7 PROBLEM ENCOUNTERED
CHAPTER FIVE
5.1 CONCLUSION
5.2 RECOMMENDATION
5.3 REFERENCES
Design And Construction Of A TV Pattern Generator. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-construction-of-a-tv-pattern-generator/
“Design And Construction Of A TV Pattern Generator.” UniTopics, https://www.unitopics.com/project/material/design-and-construction-of-a-tv-pattern-generator/. Accessed 22 November 2024.
“Design And Construction Of A TV Pattern Generator.” UniTopics, Accessed November 22, 2024. https://www.unitopics.com/project/material/design-and-construction-of-a-tv-pattern-generator/
Here’s a typical structure for Design And Construction Of A TV Pattern Generator research projects:
- The title page of Design And Construction Of A TV Pattern Generator should include the project title, your name, institution, and date.
- The abstract of Design And Construction Of A TV Pattern Generator should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Construction Of A TV Pattern Generator should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Construction Of A TV Pattern Generator, identifying gaps the study aims to fill.
- The methodology section of Design And Construction Of A TV Pattern Generator should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Construction Of A TV Pattern Generator research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Construction Of A TV Pattern Generator results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Construction Of A TV Pattern Generator study and restate its significance.
- List all the sources you cited in Design And Construction Of A TV Pattern Generator project, following a specific citation style (e.g., APA, MLA, Chicago).