ABSTRACT
This work is on low-cost timer from the circuit of an old quartz clock. This timer has time duration of up to two hours, which is sufficient for most day-to-day activities.
The quartz clock circuit has two outputs that drive a coil. One of them (which produces a pulse every two seconds) is used to drive counter CD4040, which can count up to 4096. The time duration as per your requirement can be set using DIP switches. Each switch has its own set time duration. The desired time is set with Q5 to Q12 outputs via DIP switches 1 through 8 (refer the table). That is, if you want to set the time duration to 68 minutes, shift switch 8 to ‘on’ position. This will make Q12 high. If two switches are ‘on,’ the time duration set will be equal to the sum of individual time durations. You can set maximum time duration of 136 minutes (which is the sum of the outputs of all the switches) by making all the switches ‘on.’ The outputs of the counter pass through diodes D5 through D12.
TABLE OF CONTENTS
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
1.2 AIM OF THE PROJECT
1.3 OBJECTIVE OF THE PROJECT
1.4 SIGNIFICANCE OF THE PROJECT
1.5 PURPOSE OF THE PROJECT
1.6 APPLICATION OF THE PROJECT
1.7 ADVANTAGES OF THE PROJECT
1.8 PROBLEM/LIMITATION OF THE PROJECT
1.9 PROJECT ORGANISATION
CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 REVIEW OF RELATED STUDIES
2.2 REVIEW OF RELATED TERMS
2.3 REVIEW OF CLOCK AND OLD QUARTZ CLOCK
CHAPTER THREE
3.0 CONSTRUCTION METHODOLOGY
3.1 SYSTEM CIRCUIT DIAGRAM
3.2 SYSTEM OPERATION
3.3 CIRCUIT DESCRIPTION
3.4 SYSTEM CIRCUIT DIAGRAM
3.5 CIRCUIT OPERATION
3.6 IMPORTANCE AND FUNCTION OF THE MAJOR COMPONENTS USED IN THIS CIRCUIT
3.7 POWER SUPPLY UNIT
CHAPTER FOUR
RESULT ANALYSIS
4.0 CONSTRUCTION PROCEDURE AND TESTING
4.1 CASING AND PACKAGING
4.2 ASSEMBLING OF SECTIONS
4.3 TESTING
4.4.1 PRE-IMPLEMENTATION TESTING
4.4.2 POST-IMPLEMENTATION TESTING
4.5 RESULT
4.6 COST ANALYSIS
CHAPTER FIVE
5.0 CONCLUSION
5.1 RECOMMENDATION
5.2 REFERENCES
Design And Construction Of A Timer From Old Quartz Clock. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-construction-of-a-timer-from-old-quartz-clock/
“Design And Construction Of A Timer From Old Quartz Clock.” UniTopics, https://www.unitopics.com/project/material/design-and-construction-of-a-timer-from-old-quartz-clock/. Accessed 20 September 2024.
“Design And Construction Of A Timer From Old Quartz Clock.” UniTopics, Accessed September 20, 2024. https://www.unitopics.com/project/material/design-and-construction-of-a-timer-from-old-quartz-clock/
Here’s a typical structure for Design And Construction Of A Timer From Old Quartz Clock research projects:
- The title page of Design And Construction Of A Timer From Old Quartz Clock should include the project title, your name, institution, and date.
- The abstract of Design And Construction Of A Timer From Old Quartz Clock should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Construction Of A Timer From Old Quartz Clock should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Construction Of A Timer From Old Quartz Clock, identifying gaps the study aims to fill.
- The methodology section of Design And Construction Of A Timer From Old Quartz Clock should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Construction Of A Timer From Old Quartz Clock research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Construction Of A Timer From Old Quartz Clock results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Construction Of A Timer From Old Quartz Clock study and restate its significance.
- List all the sources you cited in Design And Construction Of A Timer From Old Quartz Clock project, following a specific citation style (e.g., APA, MLA, Chicago).