The basic aim of the design and construction of this three phase automatic phase selector is to demonstrate how contactors can be used to switch in between three lines or phases e.g “RED, YELLOW AND THE BLUE PHASE” without interfering with the contacts.
This type of phase selector is able to switch between phases with the aid of inter-locking one phase to the other either one phase circuit is dependant on the other phase circuit which means that two phase circuit which that two phases cannot come on at the same time.
This research work is divided into six chapters, chapter one emphasizes on the introduction of the topic, the second chapter centers on the review p=of related literature as it regard to the design and construction of this Automatic three phase selector.
Title Page
Certification
Dedication
Acknowledgement
Abstract
Table Of Contents
Chapter One
1.1 Introduction
Chapter Two
2.1 Review Of Related Literatures
2.2 Contactors
2.3 Auxiliary Timer
2.4 Circuit Breaker
2.5 Indicator Lights.
Chapter Three
3.1 Outline Of Basic Principles
3.2 Principles Of Operation
Chapter Four
4.1 Research Design And Construction
4.2 Project Construction
4.3 Mounting Of Components
4.4 Packaging
4.5 Precaution
Chapter Five
5.1 Economic Of The Project
5.2 Project Viability
5.3 Area Of Usage
5.4 Costing
Chapter Six
6.1 Associated Fault And Remedies
6.2 Conclusion
Reference
Design And Construction Of A Three Phase Automatic Phase Selector. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-construction-of-a-three-phase-automatic-phase-selector/
“Design And Construction Of A Three Phase Automatic Phase Selector.” UniTopics, https://www.unitopics.com/project/material/design-and-construction-of-a-three-phase-automatic-phase-selector/. Accessed 22 November 2024.
“Design And Construction Of A Three Phase Automatic Phase Selector.” UniTopics, Accessed November 22, 2024. https://www.unitopics.com/project/material/design-and-construction-of-a-three-phase-automatic-phase-selector/
Here’s a typical structure for Design And Construction Of A Three Phase Automatic Phase Selector research projects:
- The title page of Design And Construction Of A Three Phase Automatic Phase Selector should include the project title, your name, institution, and date.
- The abstract of Design And Construction Of A Three Phase Automatic Phase Selector should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Construction Of A Three Phase Automatic Phase Selector should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Construction Of A Three Phase Automatic Phase Selector, identifying gaps the study aims to fill.
- The methodology section of Design And Construction Of A Three Phase Automatic Phase Selector should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Construction Of A Three Phase Automatic Phase Selector research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Construction Of A Three Phase Automatic Phase Selector results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Construction Of A Three Phase Automatic Phase Selector study and restate its significance.
- List all the sources you cited in Design And Construction Of A Three Phase Automatic Phase Selector project, following a specific citation style (e.g., APA, MLA, Chicago).