This work is aimed at designing and fabricating a spin dryer which can be used in drying spent grains after brewing. This will no doubt save considerable human labours and time wastage involved in conventional method of drying the spent grains by spreading on the ground. It also saves as a means of employments for our teaming population. This machine was designed after due consideration of its ease of production, maintenance and servicing.
Chapter one gives account of the introductory background of the project. Chapter two was the literature review of the project. Chapter three was the synthesis of solution under which different alternatives, comparison of alternatives and choice were discussed. In chapter four, effort was made to discuss the Analysis and Theory of design. The details of construction, Maintenance, Procedures and testing and evaluation were discussed, In chapter five. After the testing, it was found to perform effectively and efficiently. Chapter six became the home for Material evaluation, machine and labour cost analysis. Finally was chapter seven, where we based our discussion on the project, possible recommendations and conclusion.
Title page
Approval page
Release page
Signature page
Dedication
Acknowledgement
Abstract
Table of contents
CHAPTER ONE –
INTRODUCTION
1.1 Identification of Needs
1.2 Purpose of Construction
1.3 Importance and Specification of the project
1.4 Scope
CHAPTER TWO –
LITERATURE REVIEW
2.1 History about the project
2.2 Introduction of the project
CHAPTER THREE –
SYNTHESIS OF SOLUTION
3.1 Different Alternative
3.2 Comparison of Alternatives and Choice
CHAPTER FOUR –
THEORY OF DESIGN AND ANALYSIS
4.1 Theory of Design
4.2 Analysis of Design
CHAPTER FIVE –
CONSTRUCTION/MAINTENANCE PROCEDURES
5.1 Material Selection
5.2 Production Processes –Workshop Operational Sequences
5.3 Machining of Components
5.4 Assembly Procedures
5.5 Testing and Evaluation
CHAPTER SIX
6.1 Material Costing Analysis
6.2 Machine Cost Analysis
6.3 Labour Cost Analysis
CHAPTER SEVEN
7.0 Discussion
7.1 Recommendation
7.2 Conclusion
Bibliography
Working Diagram
Design And Construction Of A Spin Dryer. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-construction-of-a-spin-dryer/
“Design And Construction Of A Spin Dryer.” UniTopics, https://www.unitopics.com/project/material/design-and-construction-of-a-spin-dryer/. Accessed 22 November 2024.
“Design And Construction Of A Spin Dryer.” UniTopics, Accessed November 22, 2024. https://www.unitopics.com/project/material/design-and-construction-of-a-spin-dryer/
Here’s a typical structure for Design And Construction Of A Spin Dryer research projects:
- The title page of Design And Construction Of A Spin Dryer should include the project title, your name, institution, and date.
- The abstract of Design And Construction Of A Spin Dryer should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Construction Of A Spin Dryer should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Construction Of A Spin Dryer, identifying gaps the study aims to fill.
- The methodology section of Design And Construction Of A Spin Dryer should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Construction Of A Spin Dryer research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Construction Of A Spin Dryer results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Construction Of A Spin Dryer study and restate its significance.
- List all the sources you cited in Design And Construction Of A Spin Dryer project, following a specific citation style (e.g., APA, MLA, Chicago).