ABSTRACT
The emergency light is an automatic system in which a rechargeable battery-operated light source turns on as soon as the mains power fails. When the mains supply resumes, the lamp turns off. Usually, 6V sealed maintenance-free (SMF) batteries are used in portable emergency lights. Many low-cost lights give no indication when the battery goes flat, so there is the risk of battery failure. This work is on a battery guard circuit for emergency lights having no deep-discharge protection circuitry. It disconnects the bulb in case the battery voltage goes below a safe value (5V).
TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
- PURPOSE OF THE PROJECT
- AIM OF THE PROJECT
- OBJECTIVE OF THE PROJECT
- PURPOSE OF THE PROJECT
- LIMITATION OF THE PROJECT
- ADVANTAGES OF THE PROJECT
- PROBLEM OF THE PROJECT
- APPLICATION OF THE PROJECT
- RESEARCH QUESTION
- PROJECT ORGANISATION
CHAPTER TWO
LITERATURE REVIEW
- OVERVIEW OF THE STUDY
- REVIEW OF THE RELATED STUDY
CHAPTER THREE
3.0 CONSTRUCTION METHODOLOGY
3.1 BASIC OF THE SYSTEM
3.2 BLOCK DIAGRAM OF THE SYSTEM
3.3 SYSTEM OPERATION
3.4 CIRCUIT DIAGRAM
3.5 CIRCUIT DESCRIPTION
3.6 DESCRIPTION OF COMPONENTS USED
3.7 POWER SUPPLY UNIT
CHAPTER FOUR
4.0 TESTING AND RESULTS
- CONSTRUCTION PROCEDURE AND TESTING
- INSTALLATION OF THE COMPLET DESIGN
- ASSEMBLING OF SECTIONS
- TESTING OF SYSTEM OPERATION
- COST ANALYSIS
CHAPTER FIVE
- CONCLUSION
- RECOMMENDATION
- REFERENCES
Design And Construction Of A SMF Battery Guard. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-construction-of-a-smf-battery-guard/
“Design And Construction Of A SMF Battery Guard.” UniTopics, https://www.unitopics.com/project/material/design-and-construction-of-a-smf-battery-guard/. Accessed 23 November 2024.
“Design And Construction Of A SMF Battery Guard.” UniTopics, Accessed November 23, 2024. https://www.unitopics.com/project/material/design-and-construction-of-a-smf-battery-guard/
Here’s a typical structure for Design And Construction Of A SMF Battery Guard research projects:
- The title page of Design And Construction Of A SMF Battery Guard should include the project title, your name, institution, and date.
- The abstract of Design And Construction Of A SMF Battery Guard should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Construction Of A SMF Battery Guard should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Construction Of A SMF Battery Guard, identifying gaps the study aims to fill.
- The methodology section of Design And Construction Of A SMF Battery Guard should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Construction Of A SMF Battery Guard research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Construction Of A SMF Battery Guard results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Construction Of A SMF Battery Guard study and restate its significance.
- List all the sources you cited in Design And Construction Of A SMF Battery Guard project, following a specific citation style (e.g., APA, MLA, Chicago).