A smart fan is designed with op-amp is quite useful for conference halls, auditoriums, cinema halls, and other commercial organizations where many people gathered together, and lot of fans are required at these places. Depending up on the weather condition, organizers of the above places are supposed to be control each and every fan, otherwise lot of energy will be wasted. Controlling each and every fan manually is highly impossible; there by this project work is taken up, which controls the fan automatically depending upon the temperature. Here for the demonstration purpose single fan is considered, but in practical all the fans can be connected to this single instrument, so that all the fans rotates equally.
The basic concept of this project work is, depending upon the room temperature to control the fan speed automatically using thermister as the temperature sensor.
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
1.2 PROBLEM STATEMENT
1.3 OBJECTIVE OF THE PROJECT
1.4 PURPOSE OF THE PROJECT
1.5 SIGNIFICANCE OF THE PROJECT
1.6 SCOPE OF THE PROJECT
1.7 APPLICATION OF THE PROJECT
1.8 METHODOLOGY
1.9 PROJECT ORGANISATION
CHAPTER TWO
LITERATURE REVIEW
2.1 HISTORICAL BACKGROUND OF THE PROJECT
2.2 REVIEW OF DIFFERENT TYPES OF FANS
2.3 REVIEW OF AN ELECTRIC MOTOR
2.4 REVIEW OF DIFFERENT TYPES OF TEMPERATURE CONTROLLERS AND THEIR WORKING PRINCIPLE
2.5 DEFINITION OF TEMPERATURE SENSOR
2.6 TYPES OF TEMPERATURE SENSORS
CHAPTER THREE
SYSTEM DESIGN
3.1 SYSTEM BLOCK DIAGRAM
3.2 SYSTEM BLOCK DESCRIPTION
3.3 SYSTEM CIRCUIT DIAGRAM
3.4 SYSTEM OPERATION
3.5 LIST OF COMPONENTS USED
3.6 WORKING PRINCIPLE
3.7 POWER SUPPLY UNIT
CHAPTER FOUR
4.0 TEST AND RESULT ANALYSIS
4.1 CONSTRUCTION PROCEDURE AND TESTING
4.2 CASING AND PACKAGING
4.3 ASSEMBLING OF SECTIONS
4.4 TESTING OF SYSTEM OPERATION
4.5 INSTALLATION OF THE COMPLETED DESIGN
4.6 PROBLEM ENCOUNTERED
CHAPTER FIVE
5.1 CONCLUSION
5.2 RECOMMENDATION
5.3 REFERENCES
Design and Construction of A Smart Fan. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-construction-of-a-smart-fan/
“Design and Construction of A Smart Fan.” UniTopics, https://www.unitopics.com/project/material/design-and-construction-of-a-smart-fan/. Accessed 24 November 2024.
“Design and Construction of A Smart Fan.” UniTopics, Accessed November 24, 2024. https://www.unitopics.com/project/material/design-and-construction-of-a-smart-fan/
Here’s a typical structure for Design and Construction of A Smart Fan research projects:
- The title page of Design and Construction of A Smart Fan should include the project title, your name, institution, and date.
- The abstract of Design and Construction of A Smart Fan should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design and Construction of A Smart Fan should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design and Construction of A Smart Fan, identifying gaps the study aims to fill.
- The methodology section of Design and Construction of A Smart Fan should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design and Construction of A Smart Fan research study using tables, charts, and graphs to illustrate key points.
- Interpret Design and Construction of A Smart Fan results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design and Construction of A Smart Fan study and restate its significance.
- List all the sources you cited in Design and Construction of A Smart Fan project, following a specific citation style (e.g., APA, MLA, Chicago).