This project work is on design and construction of a smart emergency light system. An automatic emergency light is an electronics device used in turning light ON during dark condition. Smart Emergency Light will turn on the Emergency light only during the Dark condition. Ordinary emergency light will be switched ON during the power failure condition. So that if there was a power failure in day time the ordinary emergency light will also be switched on. So there is a loss of power. Our system will continuously monitor the light falling on the LDR and when there was no sufficient light over the LDR and there is a power failure then it will switch on the Light. So that the place at which the circuit was connected will always in Bright. And if there is a power failure then the power to drive the emergency light was taken from the Battery supplied with the circuit.
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENTS
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE STUDY
1.2 PROBLEM STATEMENT
1.3 AIM/OBJECTIVES OF THE PROJECT
1.4 SIGNIFICANCE OF THE PROJECT
1.5 SCOPE OF THE PROJECT
CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 OVERVIEW OF THE STUDY
2.2 REVIEW OF RELATED STUDIES
2.3 HISTORICAL BACKGROUND OF THE PROJECT
2.4 MODERN INSTALLATIONS OF THE PROJECT
2.3 ELECTRIC POWER SYSTEM
2.4 HISTORY OF POWER FAILURE AND SYSTEM RELIABILITY
2.5 DESCRIPTION OF POWER OUTAGE
2.6 TYPES OF POWER OUTAGE
2.7 PROTECTING THE POWER SYSTEM FROM FAILURE
2.8 RESTORING POWER AFTER A WIDE-AREA OUTAGE
2.9 POWER FAILURE INEVITABILITY AND ELECTRIC SUSTAINABILITY
2.9 MITIGATION OF POWER OUTAGE FREQUENCY
CHAPTER THREE
3.0 METHODOLOGY
3.1 BLOCK DIAGRAM OF THE SYSTEM
3.2 CIRCUIT DIAGRAM
3.3 COMPONENTS LIST OF THE CIRCUITS
3.4 SYSTEM OPERATION
3.5 DESCRIPTION OF MAJOR COMPONENT’S DESCRIPTION
CHAPTER FOUR
4.0 RESULT ANALYSIS
4.1 PROCEDURE TO IMPLEMENT THE AUTOMATIC EMERGENCY LIGHT CIRCUIT
4.2 CONSTRUCTION PROCEDURE AND TESTING
4.3 CASING AND PACKAGING
4.4 ASSEMBLING OF SECTIONS
4.5 DIMENSION OF THE CASING
4.6 ECONOMIC OF THE PROJECT
4.7 PROJECT VIABILITY
4.8 RELIABILITY
CHAPTER FIVE
5.1 CONCLUSIONS
5.2 RECOMMENDATION
5.3 REFERENCES
Design And Construction Of A Smart Emergency Lighting System. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-construction-of-a-smart-emergency-lighting-system/
“Design And Construction Of A Smart Emergency Lighting System.” UniTopics, https://www.unitopics.com/project/material/design-and-construction-of-a-smart-emergency-lighting-system/. Accessed 22 November 2024.
“Design And Construction Of A Smart Emergency Lighting System.” UniTopics, Accessed November 22, 2024. https://www.unitopics.com/project/material/design-and-construction-of-a-smart-emergency-lighting-system/
Here’s a typical structure for Design And Construction Of A Smart Emergency Lighting System research projects:
- The title page of Design And Construction Of A Smart Emergency Lighting System should include the project title, your name, institution, and date.
- The abstract of Design And Construction Of A Smart Emergency Lighting System should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Construction Of A Smart Emergency Lighting System should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Construction Of A Smart Emergency Lighting System, identifying gaps the study aims to fill.
- The methodology section of Design And Construction Of A Smart Emergency Lighting System should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Construction Of A Smart Emergency Lighting System research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Construction Of A Smart Emergency Lighting System results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Construction Of A Smart Emergency Lighting System study and restate its significance.
- List all the sources you cited in Design And Construction Of A Smart Emergency Lighting System project, following a specific citation style (e.g., APA, MLA, Chicago).