This project work-up deals on the design and construction of a single phase step down nations fermor, with raking IKVA, 240V/11OV, 80V 12U, 6V. It is a multi-circuit transformer that has one input as the primary and tappins to produce the output (secondary). It is considered as a single coil in series with the supply and a common coil to the head. It is experimentally done using flat metal shocks of cast steel to form the “E” and “I” shaped laminations and coils of various turns.
Not much progress has been made by those who were in the field in the production of a much circuit auto-transformer. While working this project, we got information from some textbooks on auto-transformer and some expert in the field.
However, the write up goes beyond the perspectives of an ordinary layman’s belief that the theory behind the construction of an auto-transformer cannot be achieved practically by Nigerian Engineers in this country. Every aspect of the auto-transformer.
Cover Page
Dedication
Acknowledgements
Abstract
Table Of Contents
Chapter One
1.0 Introduction
1.1 Background
1.2 Aims Of Study
1.3 The Scope Of Study
1.4 The Auto-Transformer
1.5 Definition Of Terms
Chapter Two
2.0 Literature Review
2.1 Definition And Operation Of Auto-Transformer
2.2 Formulae Of Auto-Transformer
2.3 Components Of Flux In An Auto-Transformer
2.4 Fauits In Auto-Transformer
2.5 Losses In Auto-Transformer
Chapter Three
3.0 Construction
3.1 Construction Of The Former
3.2 Methods Of Counting Members Of Turns
3.3 Standard Wire Guages And Lamination
3.4 Construction Of The Enclosure And Complete Unit
3.5 Testings
3.6 Precautions
3.7 Bill Of Quantities
Chapter Four
4.0 Summary
4.1 Conclusion
4.1 Recommendation
References
Construction Of PVS Conduit Wiring System Of Two Bedroom Bungalow. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-construction-of-a-single-phase-auto-transformer-of-rating-ikva-240v-110-80-12v-6v/
“Construction Of PVS Conduit Wiring System Of Two Bedroom Bungalow.” UniTopics, https://www.unitopics.com/project/material/design-and-construction-of-a-single-phase-auto-transformer-of-rating-ikva-240v-110-80-12v-6v/. Accessed 20 September 2024.
“Construction Of PVS Conduit Wiring System Of Two Bedroom Bungalow.” UniTopics, Accessed September 20, 2024. https://www.unitopics.com/project/material/design-and-construction-of-a-single-phase-auto-transformer-of-rating-ikva-240v-110-80-12v-6v/
Here’s a typical structure for Construction Of PVS Conduit Wiring System Of Two Bedroom Bungalow research projects:
- The title page of Construction Of PVS Conduit Wiring System Of Two Bedroom Bungalow should include the project title, your name, institution, and date.
- The abstract of Construction Of PVS Conduit Wiring System Of Two Bedroom Bungalow should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Construction Of PVS Conduit Wiring System Of Two Bedroom Bungalow should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Construction Of PVS Conduit Wiring System Of Two Bedroom Bungalow, identifying gaps the study aims to fill.
- The methodology section of Construction Of PVS Conduit Wiring System Of Two Bedroom Bungalow should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Construction Of PVS Conduit Wiring System Of Two Bedroom Bungalow research study using tables, charts, and graphs to illustrate key points.
- Interpret Construction Of PVS Conduit Wiring System Of Two Bedroom Bungalow results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Construction Of PVS Conduit Wiring System Of Two Bedroom Bungalow study and restate its significance.
- List all the sources you cited in Construction Of PVS Conduit Wiring System Of Two Bedroom Bungalow project, following a specific citation style (e.g., APA, MLA, Chicago).