ABSTRACT
This work is on sequential device control using TV remote control. This device lets one to switch ON and switch OFF up to nine devices sequentially from your TV remote control.
The circuit consists of an IR sensor module TSOP1738, which is equivalent to TSOP1238. The output of TSOP1738 is fed to the trigger input (pin 2) of IC NE555 (IC1) via LED1. IC1 is wired in monostable mode and its output is fed to clock input of IC CD4017 (IC2). All the nine outputs of IC2 are connected to the bases of relay-driver transistors T1 through T9 that controls the loads via resistors R7 through R15, respectively. Relays RL1 through RL9 are connected between the positive terminal of 12V and collectors of respective transistors.
TABLE OF CONTENTS
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENT
Design And Construction Of A Sequential Device Control Using Tv Remote Control. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-construction-of-a-sequential-device-control-using-tv-remote-control/
“Design And Construction Of A Sequential Device Control Using Tv Remote Control.” UniTopics, https://www.unitopics.com/project/material/design-and-construction-of-a-sequential-device-control-using-tv-remote-control/. Accessed 20 September 2024.
“Design And Construction Of A Sequential Device Control Using Tv Remote Control.” UniTopics, Accessed September 20, 2024. https://www.unitopics.com/project/material/design-and-construction-of-a-sequential-device-control-using-tv-remote-control/
Here’s a typical structure for Design And Construction Of A Sequential Device Control Using Tv Remote Control research projects:
- The title page of Design And Construction Of A Sequential Device Control Using Tv Remote Control should include the project title, your name, institution, and date.
- The abstract of Design And Construction Of A Sequential Device Control Using Tv Remote Control should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Construction Of A Sequential Device Control Using Tv Remote Control should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Construction Of A Sequential Device Control Using Tv Remote Control, identifying gaps the study aims to fill.
- The methodology section of Design And Construction Of A Sequential Device Control Using Tv Remote Control should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Construction Of A Sequential Device Control Using Tv Remote Control research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Construction Of A Sequential Device Control Using Tv Remote Control results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Construction Of A Sequential Device Control Using Tv Remote Control study and restate its significance.
- List all the sources you cited in Design And Construction Of A Sequential Device Control Using Tv Remote Control project, following a specific citation style (e.g., APA, MLA, Chicago).