The design and construction of s refrigerating unit is handled from the knowledge of the working principles of laws of thermodynamics.
The size of the containing vessel i.e the case as established to be of 45cm by 32 cm in dimension. The Angle iron mild steel to used in the fabrication and welding. The box case of two layers are fabricated. Plastic (cooler) box is then placed inside the upper part with the other parts of the refrigerator were brought in. they were all fixed onto a wooden base with all the connections (electrical) made.
The capacity of the refrigerator is based on the workdone by the compressor which is O.I hp in specification. The size of the components used are
i. Condenser: The size is 0.1hp and it is a plate type condenser with extended surface.
ii. Compressor: The size is 0.1hp (75 watts)
iii. Copper wire: it is of 0.5cm in diameter and the total copper wire length is about 600cm (1½ roll)
The introduction of cooling fluid and filling of the compressor enabled the compressor to start functioning when connected to electricity using a 13 AMP rated socket
The interior of the plastic box is lined with dominium box with tubes arranged in convolution around it. This world effectively and cooled the water dropped into it. It compares favorably with the ones in the market.
TITLE PAGE
LETTER OF TRANSMITTAL
APPROVAL/CERTIFICATION
DEDICATION
ACKNOWLEDGMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER ONE
1.0 INTRODUCTION
1.1 SCOPE OF THE PROJECT
CHAPTER TWO
HISTORY OF REFRIGERATION
TYPES OF REFRIGERATING DEVICE
USES OF REFRIGERATION
CHAPTER THREE
SEQUENCE OF OPERATIONS
SELECTION OF REFRIGRANTS
CONSTRUCTION PROCEDURE
ECONOMIC ANALYSIS
CHAPTER FOUR
4.1 CONCLUSION
4.2 RECOMMENDATIONS
REFERENCES
Design And Construction Of A Refrigerating Unit. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-construction-of-a-refrigerating-unit/
“Design And Construction Of A Refrigerating Unit.” UniTopics, https://www.unitopics.com/project/material/design-and-construction-of-a-refrigerating-unit/. Accessed 18 January 2025.
“Design And Construction Of A Refrigerating Unit.” UniTopics, Accessed January 18, 2025. https://www.unitopics.com/project/material/design-and-construction-of-a-refrigerating-unit/
Here’s a typical structure for Design And Construction Of A Refrigerating Unit research projects:
- The title page of Design And Construction Of A Refrigerating Unit should include the project title, your name, institution, and date.
- The abstract of Design And Construction Of A Refrigerating Unit should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Construction Of A Refrigerating Unit should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Construction Of A Refrigerating Unit, identifying gaps the study aims to fill.
- The methodology section of Design And Construction Of A Refrigerating Unit should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Construction Of A Refrigerating Unit research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Construction Of A Refrigerating Unit results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Construction Of A Refrigerating Unit study and restate its significance.
- List all the sources you cited in Design And Construction Of A Refrigerating Unit project, following a specific citation style (e.g., APA, MLA, Chicago).