ABSTRACT
This work is on a PIN diode based fire sensor that activates an alarm when it detects fire. Thermistor based fire alarms have a drawback; the alarm turns on only if the fire heats the thermistor in close vicinity. In this circuit, a sensitive PIN diode is used as a fire sensor for longer-range fire detection.
PIN diode based fire sensor detects visible light and infrared (IR) in the range of 430nm – 1100nm. So visible light and IR from the fire can easily activate the sensor to trigger the alarm. It also detects sparks in the mains wiring and, if these persist, it gives a warning alarm.
TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
- PURPOSE OF THE PROJECT
- AIM OF THE PROJECT
- OBJECTIVE OF THE PROJECT
- PURPOSE OF THE PROJECT
- LIMITATION OF THE PROJECT
- ADVANTAGES OF THE PROJECT
- PROBLEM OF THE PROJECT
- APPLICATION OF THE PROJECT
- RESEARCH QUESTION
- PROJECT ORGANISATION
CHAPTER TWO
LITERATURE REVIEW
- OVERVIEW OF THE STUDY
- REVIEW OF THE RELATED STUDY
- REVIEW OF THE FIRE ACCIDENT
- OVERVIEW OF PIN DIODE
CHAPTER THREE
3.0 CONSTRUCTION METHODOLOGY
3.1 BASIC OF THE SYSTEM
3.2 BLOCK DIAGRAM OF THE SYSTEM
3.3 SYSTEM OPERATION
3.4 CIRCUIT DIAGRAM
3.5 CIRCUIT DESCRIPTION
3.6 DESCRIPTION OF COMPONENTS USED
3.7 POWER SUPPLY UNIT
CHAPTER FOUR
4.0 TESTING AND RESULTS
- CONSTRUCTION PROCEDURE AND TESTING
- INSTALLATION OF THE COMPLET DESIGN
- ASSEMBLING OF SECTIONS
- TESTING OF SYSTEM OPERATION
- COST ANALYSIS
CHAPTER FIVE
- CONCLUSION
- RECOMMENDATION
- REFERENCES
Design And Construction Of A Pin Diode Based Fire Sensor. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-construction-of-a-pin-diode-based-fire-sensor/
“Design And Construction Of A Pin Diode Based Fire Sensor.” UniTopics, https://www.unitopics.com/project/material/design-and-construction-of-a-pin-diode-based-fire-sensor/. Accessed 10 November 2024.
“Design And Construction Of A Pin Diode Based Fire Sensor.” UniTopics, Accessed November 10, 2024. https://www.unitopics.com/project/material/design-and-construction-of-a-pin-diode-based-fire-sensor/
Here’s a typical structure for Design And Construction Of A Pin Diode Based Fire Sensor research projects:
- The title page of Design And Construction Of A Pin Diode Based Fire Sensor should include the project title, your name, institution, and date.
- The abstract of Design And Construction Of A Pin Diode Based Fire Sensor should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Construction Of A Pin Diode Based Fire Sensor should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Construction Of A Pin Diode Based Fire Sensor, identifying gaps the study aims to fill.
- The methodology section of Design And Construction Of A Pin Diode Based Fire Sensor should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Construction Of A Pin Diode Based Fire Sensor research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Construction Of A Pin Diode Based Fire Sensor results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Construction Of A Pin Diode Based Fire Sensor study and restate its significance.
- List all the sources you cited in Design And Construction Of A Pin Diode Based Fire Sensor project, following a specific citation style (e.g., APA, MLA, Chicago).