ABSTRACT
Peak Detector Circuit is used to find the peak amplitude in a rapidly changing waveform. Peak detectors are generally used in the sound measuring applications to find the maximum level of sound in a particular area or place, that helps in determining the maximum loudness level in that place.
This work is on op-amp based peak detector, used to remove the voltage drop across the diode. Whenever the applied input voltage signal is greater than the threshold voltage of the diode, the diode will get forward biased and acts as a closed switch. Here, the diode is connected in the feedback and hence the circuit works as a buffer circuit. So, whatever input is applied to the positive terminal of the op-amp will be received at the output terminal.
TABLE OF CONTENTS
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
1.2 AIM OF THE PROJECT
1.3 OBJECTIVE OF THE PROJECT
1.4 SIGNIFICANCE OF THE PROJECT
1.5 PURPOSE OF THE PROJECT
1.6 APPLICATION OF THE PROJECT
1.7 ADVANTAGES OF THE PROJECT
1.8 PROBLEM/LIMITATION OF THE PROJECT
1.9 PROJECT ORGANISATION
CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 REVIEW OF RELATED STUDIES
2.2 REVIEW OF RELATED TERMS
CHAPTER THREE
3.0 CONSTRUCTION METHODOLOGY
3.1 SYSTEM CIRCUIT DIAGRAM
3.2 SYSTEM OPERATION
3.3 CIRCUIT DESCRIPTION
3.4 SYSTEM CIRCUIT DIAGRAM
3.5 CIRCUIT OPERATION
3.6 IMPORTANCE AND FUNCTION OF THE MAJOR COMPONENTS USED IN THIS CIRCUIT
3.7 POWER SUPPLY UNIT
CHAPTER FOUR
RESULT ANALYSIS
4.0 CONSTRUCTION PROCEDURE AND TESTING
4.1 CASING AND PACKAGING
4.2 ASSEMBLING OF SECTIONS
4.3 TESTING
4.4.1 PRE-IMPLEMENTATION TESTING
4.4.2 POST-IMPLEMENTATION TESTING
4.5 RESULT
4.6 COST ANALYSIS
CHAPTER FIVE
5.0 CONCLUSION
5.1 RECOMMENDATION
5.2 REFERENCES
Design And Construction Of A Peak Detector Circuit. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-construction-of-a-peak-detector-circuit/
“Design And Construction Of A Peak Detector Circuit.” UniTopics, https://www.unitopics.com/project/material/design-and-construction-of-a-peak-detector-circuit/. Accessed 22 November 2024.
“Design And Construction Of A Peak Detector Circuit.” UniTopics, Accessed November 22, 2024. https://www.unitopics.com/project/material/design-and-construction-of-a-peak-detector-circuit/
Here’s a typical structure for Design And Construction Of A Peak Detector Circuit research projects:
- The title page of Design And Construction Of A Peak Detector Circuit should include the project title, your name, institution, and date.
- The abstract of Design And Construction Of A Peak Detector Circuit should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Construction Of A Peak Detector Circuit should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Construction Of A Peak Detector Circuit, identifying gaps the study aims to fill.
- The methodology section of Design And Construction Of A Peak Detector Circuit should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Construction Of A Peak Detector Circuit research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Construction Of A Peak Detector Circuit results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Construction Of A Peak Detector Circuit study and restate its significance.
- List all the sources you cited in Design And Construction Of A Peak Detector Circuit project, following a specific citation style (e.g., APA, MLA, Chicago).