ABSTRACT
The Liquid Level Alarms are designed to provide warning indication when storage (Effluent, Grey Water or Rain Water etc) tank is either empty or full. Warning indication is determined by a float switch. Warnings are; Audio (buzzer), Visual (LED Pilot Light and/or Strobe). The Buzzer can be muted via a mute button. If not muted the Audible buzzer will automatically silence after 5 minutes. If a continuously sounding audible alarm is required, this can be done by changing the Jumper position on the circuit board.
The visual alarms will continue to remain on, until the alarm condition is eradicated. A standard feature of the Level Alarm is a ‘Voltage Free’ (5Amp rated) output for connection to auxiliary devices. Controller can be installed up to 50m from the tank being monitored. Float Switch cabling is ‘safe’, low voltage circuitry.
TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
- PURPOSE OF THE PROJECT
- AIM OF THE PROJECT
- OBJECTIVE OF THE PROJECT
- PURPOSE OF THE PROJECT
- LIMITATION OF THE PROJECT
- ADVANTAGES OF THE PROJECT
- PROBLEM OF THE PROJECT
- APPLICATION OF THE PROJECT
- RESEARCH QUESTION
- PROJECT ORGANISATION
CHAPTER TWO
LITERATURE REVIEW
- OVERVIEW OF THE STUDY
- REVIEW OF THE RELATED STUDY
CHAPTER THREE
3.0 CONSTRUCTION METHODOLOGY
3.1 BASIC OF THE SYSTEM
3.2 BLOCK DIAGRAM OF THE SYSTEM
3.3 SYSTEM OPERATION
3.4 CIRCUIT DIAGRAM
3.5 CIRCUIT DESCRIPTION
3.6 DESCRIPTION OF COMPONENTS USED
3.7 POWER SUPPLY UNIT
CHAPTER FOUR
4.0 TESTING AND RESULTS
- CONSTRUCTION PROCEDURE AND TESTING
- INSTALLATION OF THE COMPLET DESIGN
- ASSEMBLING OF SECTIONS
- TESTING OF SYSTEM OPERATION
- COST ANALYSIS
CHAPTER FIVE
- CONCLUSION
- RECOMMENDATION
- REFERENCES
Design And Construction Of A Liquid Level Alarm. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-construction-of-a-liquid-level-alarm/
“Design And Construction Of A Liquid Level Alarm.” UniTopics, https://www.unitopics.com/project/material/design-and-construction-of-a-liquid-level-alarm/. Accessed 20 September 2024.
“Design And Construction Of A Liquid Level Alarm.” UniTopics, Accessed September 20, 2024. https://www.unitopics.com/project/material/design-and-construction-of-a-liquid-level-alarm/
Here’s a typical structure for Design And Construction Of A Liquid Level Alarm research projects:
- The title page of Design And Construction Of A Liquid Level Alarm should include the project title, your name, institution, and date.
- The abstract of Design And Construction Of A Liquid Level Alarm should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Construction Of A Liquid Level Alarm should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Construction Of A Liquid Level Alarm, identifying gaps the study aims to fill.
- The methodology section of Design And Construction Of A Liquid Level Alarm should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Construction Of A Liquid Level Alarm research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Construction Of A Liquid Level Alarm results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Construction Of A Liquid Level Alarm study and restate its significance.
- List all the sources you cited in Design And Construction Of A Liquid Level Alarm project, following a specific citation style (e.g., APA, MLA, Chicago).