ABSTRACT
This work is on a bicycle guard which is an anti-theft device for bicycles which is inexpensive and can be constructed easily using a few components.
At the heart of the circuit is a wheel rotation detector, realized using a DC micro motor. For the purpose, you can use the micro-motor (spindle motor) of a discarded local CD deck mechanism. Power supply switch S1 should be kept ‘on’ when you are using this bicycle guard. When it is flipped towards ‘on’ position, the circuit gets power from the miniature 12V battery. Now LED1 lights up and resistor R4 limits the LED current. Next, the monostable built around IC1, which is CMOS version of timer LM555, is powered through a low-current, fixed-voltage regulator IC2 (78L05).
TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
- PURPOSE OF THE PROJECT
- AIM OF THE PROJECT
- OBJECTIVE OF THE PROJECT
- PURPOSE OF THE PROJECT
- LIMITATION OF THE PROJECT
- ADVANTAGES OF THE PROJECT
- PROBLEM OF THE PROJECT
- APPLICATION OF THE PROJECT
- RESEARCH QUESTION
- PROJECT ORGANISATION
CHAPTER TWO
LITERATURE REVIEW
- OVERVIEW OF THE STUDY
- REVIEW OF THE RELATED STUDY
CHAPTER THREE
3.0 CONSTRUCTION METHODOLOGY
3.1 BASIC OF THE SYSTEM
3.2 BLOCK DIAGRAM OF THE SYSTEM
3.3 SYSTEM OPERATION
3.4 CIRCUIT DIAGRAM
3.5 CIRCUIT DESCRIPTION
3.6 DESCRIPTION OF COMPONENTS USED
3.7 POWER SUPPLY UNIT
CHAPTER FOUR
4.0 TESTING AND RESULTS
- CONSTRUCTION PROCEDURE AND TESTING
- INSTALLATION OF THE COMPLET DESIGN
- ASSEMBLING OF SECTIONS
- TESTING OF SYSTEM OPERATION
- COST ANALYSIS
CHAPTER FIVE
- CONCLUSION
- RECOMMENDATION
- REFERENCES
Design And Construction Of A Bicycle Guard. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-construction-of-a-bicycle-guard/
“Design And Construction Of A Bicycle Guard.” UniTopics, https://www.unitopics.com/project/material/design-and-construction-of-a-bicycle-guard/. Accessed 25 November 2024.
“Design And Construction Of A Bicycle Guard.” UniTopics, Accessed November 25, 2024. https://www.unitopics.com/project/material/design-and-construction-of-a-bicycle-guard/
Here’s a typical structure for Design And Construction Of A Bicycle Guard research projects:
- The title page of Design And Construction Of A Bicycle Guard should include the project title, your name, institution, and date.
- The abstract of Design And Construction Of A Bicycle Guard should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Construction Of A Bicycle Guard should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Construction Of A Bicycle Guard, identifying gaps the study aims to fill.
- The methodology section of Design And Construction Of A Bicycle Guard should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Construction Of A Bicycle Guard research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Construction Of A Bicycle Guard results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Construction Of A Bicycle Guard study and restate its significance.
- List all the sources you cited in Design And Construction Of A Bicycle Guard project, following a specific citation style (e.g., APA, MLA, Chicago).