This work is titled design and construction of a public address system with ac and battery power source. A public address system is an electronic sound amplification and distribution system with a microphone, amplifier and loudspeakers, used to allow a person to address a large public, for example for announcements of movements at large and noisy air and rail terminals.
The term is also used for systems which may additionally have a mixing console, and amplifiers and loudspeakers suitable for music as well as speech, used to reinforce a sound source, such as recorded music or a person giving a speech or distributing the sound throughout a venue or building.
Public addressing system is often used in small venues such as school auditoriums, churches, and small bars. PA systems with many speakers are widely used to make announcements in public, institutional and commercial buildings and locations. Intercom systems, installed in many buildings, have microphones in many rooms allowing the occupants to respond to announcements.
This system was built using some major electronics components such as transistor, resistor, capacitors, and an aluminum heatsink was used to protect the power transistors from overheating.
This Public Addressing Systems have a potential for audio feedback, which occurs when sound from the speakers is picked up by the microphone and is then re-amplified and sent through the speakers again. That makes it to sounds like a loud high-pitched squeal or screech, and can occur when the volume of the system is turned up too high.
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
1.2 PROBLEM STATEMENT
1.3 AIM/OBJECTIVE OF THE PROJECT
1.4 SIGNIFICANCE OF THE PROJECT
1.5 APPLICATION OF THE PROJECT
1.6 LIMITATION OF THE PROJECT
1.7 SCOPE OF THE PROJECT
1.8 PROJECT JUSTIFICATION
1.9 PROJECT ORGANISATION
CHAPTER TWO
LITERATURE REVIEW
2.0 LITERATURE REVIEW
2.1 REVIEW OF PUBLIC ADDRESSING SYSTEM
2.2 HISTORICAL BACKGROUND OF PUBLIC ADDRESSING SYSTEM
2.4 DIFFERENT TYPES PUBIC ADDRESSING SYSTEM
CHAPTER THREE
3.0 CONSTRUCTION METHODOLOGY
3.1 BLOCK DIAGRAM OF THE SYSTEM
3.2 CIRCUIT DIAGRAM
3.3 CIRCUIT DESCRIPTION
3.4 SYSTEM OPERATION
3.5 DESCRIPTION OF MAJOR COMPONENTS USED
CHAPTER FOUR
4.1 RESULT ANALYSIS
4.1 CONSTRUCTION PROCEDURE AND TESTING
4.2 CASING AND PACKAGING
4.3 ASSEMBLING OF SECTIONS
4.4 TESTING OF SYSTEM OPERATION
4.5 COST OF PRODUCTION
CHAPTER FIVE
5.1 CONCLUSIONS
5.2 RECOMMENDATION
5.3 REFERENCES
Design And Construction Of A 50W Public Address System. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-construction-of-a-50w-public-address-system/
“Design And Construction Of A 50W Public Address System.” UniTopics, https://www.unitopics.com/project/material/design-and-construction-of-a-50w-public-address-system/. Accessed 22 November 2024.
“Design And Construction Of A 50W Public Address System.” UniTopics, Accessed November 22, 2024. https://www.unitopics.com/project/material/design-and-construction-of-a-50w-public-address-system/
Here’s a typical structure for Design And Construction Of A 50W Public Address System research projects:
- The title page of Design And Construction Of A 50W Public Address System should include the project title, your name, institution, and date.
- The abstract of Design And Construction Of A 50W Public Address System should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Construction Of A 50W Public Address System should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Construction Of A 50W Public Address System, identifying gaps the study aims to fill.
- The methodology section of Design And Construction Of A 50W Public Address System should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Construction Of A 50W Public Address System research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Construction Of A 50W Public Address System results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Construction Of A 50W Public Address System study and restate its significance.
- List all the sources you cited in Design And Construction Of A 50W Public Address System project, following a specific citation style (e.g., APA, MLA, Chicago).