An intercommunication system is nothing but the communication between two or more persons not close to one another. This does not mean we should categorize telephones, fax, teleprinters, telegraphs etc. an example of intercom system sine they are used in communication between people. Infact, intercom involves short distance places. It is limited in electronics, offices, and hospitals.
The intercom system under is a three way station type. This means that a person can communicate to the other at another station at his own convenient time. They call once another attention by the use of the tone generated by the use of tone generator.
Depress a button and the tone sounds, and the same switch is thrown to the intercom circuit thus they communicate.
This system to be used in solving the problem of poor communication in our department. Besides, it can be extended to some other offices by the addition this one may use a rotary switch
Title Page
Certification
Dedication
Acknowledgement
Abstract
Table Of Contents
Chapter One
1.0 Introduction
Chapter Two
2.0 Complete Circuit Description
2.1 Simplified Block Diagram Of Thee 3-Way Intercom System
2.2 Operation Principles
Chapter Three
3.0 Icc1212c
3.1 Resistor
3.2 Capacitor
3.3 Condenser Microphone
3.4 Loudspeakers
3.5 Switches
3.6 Communication Cables
Chapter Four
4.0 Circuitry Design And Description
4.1 Description Of Power Supply Unit Circuit
4.2 Description Of The Tone Generator Circuit
4.3 Circuit Diagram Of The Three Units And Explanation
4.4 Explanation Of The Switching Circuit
Chapter Five
5.0 Construction And Packaging
5.01 Component Sourcing
5.1 Construction And Testing
5.2 Audio Amplifying Stage
5.3 Prototype
5.4 Trouble Shooting
5.5 Packaging
Chapter Six
6.0 Conclusion
6.1 Further Study And Design
Reference
Appendix
Design And Construction Of A 3 Way Inter Communication System. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-construction-of-a-3-way-inter-communication-system/
“Design And Construction Of A 3 Way Inter Communication System.” UniTopics, https://www.unitopics.com/project/material/design-and-construction-of-a-3-way-inter-communication-system/. Accessed 20 September 2024.
“Design And Construction Of A 3 Way Inter Communication System.” UniTopics, Accessed September 20, 2024. https://www.unitopics.com/project/material/design-and-construction-of-a-3-way-inter-communication-system/
Here’s a typical structure for Design And Construction Of A 3 Way Inter Communication System research projects:
- The title page of Design And Construction Of A 3 Way Inter Communication System should include the project title, your name, institution, and date.
- The abstract of Design And Construction Of A 3 Way Inter Communication System should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Construction Of A 3 Way Inter Communication System should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Construction Of A 3 Way Inter Communication System, identifying gaps the study aims to fill.
- The methodology section of Design And Construction Of A 3 Way Inter Communication System should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Construction Of A 3 Way Inter Communication System research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Construction Of A 3 Way Inter Communication System results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Construction Of A 3 Way Inter Communication System study and restate its significance.
- List all the sources you cited in Design And Construction Of A 3 Way Inter Communication System project, following a specific citation style (e.g., APA, MLA, Chicago).