A 1.25KVA (2000W) inverter generator was designed, constructed and certified Ok.
In this project, the design of the inverter generator is aimed at satisfying the need of converting, a D.C source of supply (12v battery) to an A.C voltage of 220v.
The inverter range of output is between 200-220v.
Since the inverter was designed to step-up voltage, the power transformer is being used as step-down transformer for charging and as step-up transformer for inverting.
The control circuit ensures appropriate switching of the input voltage from mains supply to the taping of the transformer for charging.
Title Page
Acknowledgement Sample
Dedication Sample
Abstract
Table Of Content
CHAPTER ONE
1.0 Introduction
1.1 Analysis/ Review Of Existing System
1.2 Aims And Objectives
1.3 Scope/Limit Of The Project
1.4 Application
CHAPTER TWO
2.0 Literature Review
2.1 Brief Review Of Principle Behind This Project
2.2.1 Capacitor
2.2.2 Resistors
2.2.3 Relays
2.2.4 Transistor
2.2.5 Diode
2.2.6 Switches
2.2.8 Operational Amplifiers (Op-Amp)
2.2.9 Transformer
2.2.10 A.C Volatge Meter
2.2.11 Cd 4047 (Multivibrator)
2.2.12 Mosfet
CHAPTER THREE
3.0 Mode Of Operation And Basic Components Used
3.1 Methodology 1
3.1.2 Regulator
3.1.3 Control Logic
3.1.5 Phase Splitter
3.1.6 Driver Section
3.1.7 Step-Up Transformer
3.1.8 Output Stage
3.2 Methodology 2
3.2.1 Input Stage
3.2.2 Isolating Relay
3.2.3 Step Down Transformer
3.2.3 Rectifier Circuit Via Mosfet
3.3 Theory And Calculation Of Tranformer
3.4 Core Dimension
CHAPTER FOUR
4.0 Construction Testing And Result
4.1 Problems Encountered
CHAPTER FIVE
5.0 Conclusion
5.1 Recommendation
Reference
Design And Construction Of A 2000W Inverter. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-construction-of-a-2000w-inverter/
“Design And Construction Of A 2000W Inverter.” UniTopics, https://www.unitopics.com/project/material/design-and-construction-of-a-2000w-inverter/. Accessed 21 November 2024.
“Design And Construction Of A 2000W Inverter.” UniTopics, Accessed November 21, 2024. https://www.unitopics.com/project/material/design-and-construction-of-a-2000w-inverter/
Here’s a typical structure for Design And Construction Of A 2000W Inverter research projects:
- The title page of Design And Construction Of A 2000W Inverter should include the project title, your name, institution, and date.
- The abstract of Design And Construction Of A 2000W Inverter should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Construction Of A 2000W Inverter should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Construction Of A 2000W Inverter, identifying gaps the study aims to fill.
- The methodology section of Design And Construction Of A 2000W Inverter should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Construction Of A 2000W Inverter research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Construction Of A 2000W Inverter results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Construction Of A 2000W Inverter study and restate its significance.
- List all the sources you cited in Design And Construction Of A 2000W Inverter project, following a specific citation style (e.g., APA, MLA, Chicago).