Wind power is the conversion of wind energy into more useful forms, usually electricity using wind turbines. Wind power is generated in the form of electricity by converting the rotation of turbine blades into electrical current by means of an electrical generator. In windmills (a much older technology) wind energy is used to turn mechanical machinery to do physical work, like crushing grain or pumping water. The paper describes the requirement of Wind Turbine and the comparison of Wind Energy with other Renewable Sources of Energy. A small Wind Mill suitable for domestic application is designed and fabricated. The wind turbine charges a 12 volt battery and runs various 12 volt appliances like Mixer, Juicer, Mobile Charger, CFL’s, Small fans etc. The purpose of this project is to introduce a cost efficient alternative in converting wind into energy.
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
1.2 PROBLEM STATEMENT
1.3 OBJECTIVE OF THE PROJECT
1.4 SCOPE OF THE PROJECT
1.5 SIGNIFICANCE OF THE PROJECT
1.6 LIMITATION OF THE PROJECT
1.7 APPLICATION OF THE PROJECT
1.8 TYPES OF WIND TURBINE
CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 INTRODUCTION
2.2 OVERVIEW OF THE STUDY
2.3 BRIEF HISTORY OF WIND MILLS
2.4 THE AMERICAN WIND TURBINE ( HALLADAY DESIGN )
2.5 INITIAL STAGES OF ELECTRICAL POWER PRODUCTION FROM WIND
2.6 THE NEED FOR DEVELOPMENT OF RENEWABLE ENERGY SOURCES
2.7 BASIC CONCEPTS WIND TURBINES
2.8 TYPES OF WIND TURBINE
CHAPTER THREE
3.0 CONSTRUCTION METHODOLOGY
3.1 BASICS OF THE SYSTEM
3.2 CONVERTER CIRCUITS
3.3 SETUP DIAGRAM
CHAPTER FOUR
4.0 WIND VARIABILITY AND TURBINE POWER
4.1 ENERGY ROPDUCTION TERMS
4.2 TIP-SPEED RATIO
4.3 PERFORMANCE OVER RANGE OF TIP SPEED RATIOS
4.4 ADVANTAGES OF WIND ENERGY
4.5 DISADVANTAGES OF WIND MILL
CHAPTER FIVE
5.1 CONCLUSION
5.2 RECOMMENDATION
5.3 FUTURE WORK
REFERENCES
Design And Construction of A 12V Wind Power Generation. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-construction-of-a-12v-wind-power-generation/
“Design And Construction of A 12V Wind Power Generation.” UniTopics, https://www.unitopics.com/project/material/design-and-construction-of-a-12v-wind-power-generation/. Accessed 21 November 2024.
“Design And Construction of A 12V Wind Power Generation.” UniTopics, Accessed November 21, 2024. https://www.unitopics.com/project/material/design-and-construction-of-a-12v-wind-power-generation/
Here’s a typical structure for Design And Construction of A 12V Wind Power Generation research projects:
- The title page of Design And Construction of A 12V Wind Power Generation should include the project title, your name, institution, and date.
- The abstract of Design And Construction of A 12V Wind Power Generation should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Construction of A 12V Wind Power Generation should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Construction of A 12V Wind Power Generation, identifying gaps the study aims to fill.
- The methodology section of Design And Construction of A 12V Wind Power Generation should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Construction of A 12V Wind Power Generation research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Construction of A 12V Wind Power Generation results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Construction of A 12V Wind Power Generation study and restate its significance.
- List all the sources you cited in Design And Construction of A 12V Wind Power Generation project, following a specific citation style (e.g., APA, MLA, Chicago).