A battery charger is an electrical device employed for charging batteries. This batteries that are usually charged by battery changer are the storage battery charger are the storage batteries also known as “accumulator” the battery changer changes. The alternating current form the power line into d.c suitable for charging.
When the battery is fully changed, is up to it’s maximum, 12 volt, the charger with automatically stop changing with the help of the contact relay, the transistor and the zener diode when bend the current back to the system.
Title Page
Approval Page
Dedication
Acknoweldgement
Abstrct
Table Of Content
Chapter One
1.1 Introduction
1.2 Storage Battery/Method Of Charging
Chapter Two
2.0 Component Of The Power
2.1 Supply Unit
2.2 The Rectifying Unit
2.3 The Smoothing Unit
2.4 The Regulator And Regulated
2.5 D.C Charging Unit
Chapter Three
3.0 Circuit Design/Diagrams
3.1 The Casing
3.2 Ful Wave Rectification (Positive Half Wave)
3.3 The Bridge Rectification
3.4 The Block Diagram
3.5 T Hje Circuit Diagram
3.6 The Construction
Chapter Four
4.0 Tests And Operations
4.1 Battery Charging
4.2 Diagram Of Charging And Discharging Curves
4.3 Indication F Fully Charged Battery
Chapter Five
5.1 Summary
5.2 Constraints
5.3 Conclusions
5.4 Suggestions
5.5 Cost Of Production
References
Design And Construction Of A 12 Volts Automatic Battery Charger. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-construction-of-a-12-volts-automatic-battery-charger/
“Design And Construction Of A 12 Volts Automatic Battery Charger.” UniTopics, https://www.unitopics.com/project/material/design-and-construction-of-a-12-volts-automatic-battery-charger/. Accessed 21 November 2024.
“Design And Construction Of A 12 Volts Automatic Battery Charger.” UniTopics, Accessed November 21, 2024. https://www.unitopics.com/project/material/design-and-construction-of-a-12-volts-automatic-battery-charger/
Here’s a typical structure for Design And Construction Of A 12 Volts Automatic Battery Charger research projects:
- The title page of Design And Construction Of A 12 Volts Automatic Battery Charger should include the project title, your name, institution, and date.
- The abstract of Design And Construction Of A 12 Volts Automatic Battery Charger should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Construction Of A 12 Volts Automatic Battery Charger should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Construction Of A 12 Volts Automatic Battery Charger, identifying gaps the study aims to fill.
- The methodology section of Design And Construction Of A 12 Volts Automatic Battery Charger should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Construction Of A 12 Volts Automatic Battery Charger research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Construction Of A 12 Volts Automatic Battery Charger results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Construction Of A 12 Volts Automatic Battery Charger study and restate its significance.
- List all the sources you cited in Design And Construction Of A 12 Volts Automatic Battery Charger project, following a specific citation style (e.g., APA, MLA, Chicago).