It has become inevitable that there would be communication and due to the inherent limitation of the human voice, the public address system came to being. A public address or “P.A SYSTEM” is an electronic amplification system with a mixer ,amplifier and loudspeakers, used to reinforce a given sound , e.g a person making a speech, pre-recorded music ,or message and distributing the sound throughout a venue . The voice signal is passed through a microphone , which converts the sound energy to electrical energy, the energy electrical signal being transmitted is been received and amplified by the amplifier circuit. The amplifier’s output is fed into the loudspeaker which converts the electrical energy back to the original form but amplified sound energy. This project is made up of the power supply unit, the pre-amplifier and power amplifier units, and the tone control unit. This system is capable of delivering 20W of electrical power into a 8 ohm load(loudspeaker).
Certification Page
Dedication
Acknowledgement
Abstract
Table of contents
List of Table
List of figures
CHAPTER ONE:
1.0 INTRODUCTION
1.1 Background Of The Study
1.2 Aims and Objectives
1.3 Justification
1.4 Scope of project
1.5 System block diagram
1.6 Project Work Organization
CHAPTER TWO:
2.0 LITERATURE REVIEW
2.1 Ancient medium of information transmission
2.2 Modern day medium Approach
2.2.1 Problems associated with earlier systems
2.2.2 Working principles of the modern systems
2.3 Public Address System
2.3.1 The transmitter system
2.3.2 The Receiver system
2.3.3 The Antenna
2.3.3.1 Functions of Antenna
2.3.4 The tone control and mixer stage
2.3.5 The audio amplifier
2.3.6 The loudspeaker
2.4 Modulation
2.4.1 Frequency modulation
CHAPTER THREE:
3.0 SYSTEM DESCRIPTION AND IMPLEMENTATION
3.1 Transistor power amplifier
3.2 MOSFET power amplifier
3.3 Bipolar junction transistor
3.4 Operational Amplifier
3.4.1 Class A amplifier
3.5 Implementation Method
CHAPTER FOUR:
4.0 CIRCUIT DESIGN AND ANALYSIS
4.1 Power Supply unit design
4.2 Transmitter design
4.3 Amplifier circuit design
4.4 Receiver principles
4.5 Demodulation
4.6 Transmitter circuitry
4.7 The input stage
4.8 Mixing stage
4.9 Audio power amplifier
CHAPTER FIVE:
5.0 CONSTRUCTION AND TESTING
5.1 The power supply
5.2 The output power amplifier
5.3 Dissipation of excessive heat
5.4 Entire circuit testing
5.5 Performance Evaluation
5.6 Packaging
CHAPTER SIX:
6.0 CONCLUSION AND RECOMMENDATION
6.1 Bill of Engineering measurement and Evaluation (BEME)
6.2 Problems Encountered and Solution
6.3 Audio feedback and prevention
6.5 Conclusion
6.6 Recommendation / Reference
Design And Construction Of 20W Wireless Public Address System. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-construction-of-20watts-wireless-public-address-system/
“Design And Construction Of 20W Wireless Public Address System.” UniTopics, https://www.unitopics.com/project/material/design-and-construction-of-20watts-wireless-public-address-system/. Accessed 25 November 2024.
“Design And Construction Of 20W Wireless Public Address System.” UniTopics, Accessed November 25, 2024. https://www.unitopics.com/project/material/design-and-construction-of-20watts-wireless-public-address-system/
Here’s a typical structure for Design And Construction Of 20W Wireless Public Address System research projects:
- The title page of Design And Construction Of 20W Wireless Public Address System should include the project title, your name, institution, and date.
- The abstract of Design And Construction Of 20W Wireless Public Address System should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Construction Of 20W Wireless Public Address System should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Construction Of 20W Wireless Public Address System, identifying gaps the study aims to fill.
- The methodology section of Design And Construction Of 20W Wireless Public Address System should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Construction Of 20W Wireless Public Address System research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Construction Of 20W Wireless Public Address System results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Construction Of 20W Wireless Public Address System study and restate its significance.
- List all the sources you cited in Design And Construction Of 20W Wireless Public Address System project, following a specific citation style (e.g., APA, MLA, Chicago).