This project is on a 12 and 24volt automatic battery charger with full charge alarm. This work is aimed at building an automatic battery charger which charges batteries with EMF of 12 and 24v which also indicates whenever the battery is fully charged at any of the voltage level.
Method: The device was first built on a breadboard which is later transfer to vero board and soldered. Three switches were provided for power, charging voltage selection and alarm selection.
Result: The device was completely build and coupled, the result during the test shows that the charger was able to respond to its operation when a 12 and 24volts battery were connected.
Conclusion and Recommendation: At the end of this project – battery charger, this device was built and tested. This type of device is important because there are many rechargeable devices that use 12 and 24v battery. I recommend that device should not be used for any other device lower or higher than 12 and 24v rating.
CHAPTER ONE
INTRODUCTION
Background of the Study
Problem Statement
Hypothesis/Research Questions
Objective of Study
Significance of Study
Scope of Study
Limitations of Study
Definitions of terms
CHAPTER TWO
LITERATURE REVIEW
2.1 Review of Related works
2.2 Contribution to Knowledge
2.3 Proposed system’s Theories
2.4 Expected Results from Hardware &Software
CHAPTER THREE
DESIGN METHODOLOGY
3.1 Material Parts List
3.2 Hardware Design Methods
3.3 Software Design Methods
CHAPTER FOUR
RESULTS/ANALYSIS
4.1 Testing of Hardware and software
4.2 Hardware Result/analysis
4.3 Software result/analysis
CHAPTER FIVE
SUMMARY,CONCLUSION AND RECOMMENDATIONS
5.1 Summary
5.2 Conclusion
5.3 Recommendation
Design And Construction Of 12V And 24V Automatic Battery Charger With Full Charge Alarm. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-construction-of-12-and-24v-automatic-battery-charger-with-full-charge-alarm/
“Design And Construction Of 12V And 24V Automatic Battery Charger With Full Charge Alarm.” UniTopics, https://www.unitopics.com/project/material/design-and-construction-of-12-and-24v-automatic-battery-charger-with-full-charge-alarm/. Accessed 22 November 2024.
“Design And Construction Of 12V And 24V Automatic Battery Charger With Full Charge Alarm.” UniTopics, Accessed November 22, 2024. https://www.unitopics.com/project/material/design-and-construction-of-12-and-24v-automatic-battery-charger-with-full-charge-alarm/
Here’s a typical structure for Design And Construction Of 12V And 24V Automatic Battery Charger With Full Charge Alarm research projects:
- The title page of Design And Construction Of 12V And 24V Automatic Battery Charger With Full Charge Alarm should include the project title, your name, institution, and date.
- The abstract of Design And Construction Of 12V And 24V Automatic Battery Charger With Full Charge Alarm should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Construction Of 12V And 24V Automatic Battery Charger With Full Charge Alarm should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Construction Of 12V And 24V Automatic Battery Charger With Full Charge Alarm, identifying gaps the study aims to fill.
- The methodology section of Design And Construction Of 12V And 24V Automatic Battery Charger With Full Charge Alarm should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Construction Of 12V And 24V Automatic Battery Charger With Full Charge Alarm research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Construction Of 12V And 24V Automatic Battery Charger With Full Charge Alarm results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Construction Of 12V And 24V Automatic Battery Charger With Full Charge Alarm study and restate its significance.
- List all the sources you cited in Design And Construction Of 12V And 24V Automatic Battery Charger With Full Charge Alarm project, following a specific citation style (e.g., APA, MLA, Chicago).