Despite all attempt of the federal government to have not only an uninterrupted power supply for all cities in Nigeria, but a voltage that is inconformity with the recommended 220/230v for domestic consumption for example. The NEPA Plc is facing some difficulties in generating, transmitting and distributing the required voltage stabilizer, which could be connected, to the main and then the load is in turn connected to it.
This automatic, AC voltage stabilizer has two major sections.
The transformer section, the control circuit unit the third section is the protective unit.
The output of this voltage stabilizer after series of test were performed on it has a voltage 228 + 12 at an overall output power of 1.5 KVA.
Title Page
Certification
Dedication
Acknoweldgement
Table Of Contents
List Of Table
Abstract
Chapter One
1.0 Introduction
1.1 The Transformer Unit
1.2 The Control Circuiting
Chapter Two
2.0 Literature Review
2.1 History Of The Project
2.2 The Power Supply
2.3 Theory Of Transformer
2.4 Operation Of The Transformer
2.5 Voltage Transformation Ration
2.6 Transformer Losses
Chapter Three
3.0 The Control Circuiting
3.1 Transistors
3.2 Relay
3.3 The Control Unit
3.4 The Power Supply Unit
3.5 Voltage Divider
Chapter Four
4.0 Design Analysis
4.1 Design Fo A Transformer
4.2 Design Of The Transformer Proper
4.3 Control Circuit Design
4.4 Design Calculation
4.5 Principle Of Operation
Chapter Five
5.0 Construction And Testing Of The Transformer
5.1 Short Circuit Test
5.2 Testing Of The Transformer
5.3 Open Circuit Test
5.4 Summary
5.5 Conclusion
5.6 Recommendations
References
Design And Construction Of 1000kVA Stabilizer. (n.d.). UniTopics. https://www.unitopics.com/project/material/design-and-construction-of-1000kwa-stabilizer/
“Design And Construction Of 1000kVA Stabilizer.” UniTopics, https://www.unitopics.com/project/material/design-and-construction-of-1000kwa-stabilizer/. Accessed 20 September 2024.
“Design And Construction Of 1000kVA Stabilizer.” UniTopics, Accessed September 20, 2024. https://www.unitopics.com/project/material/design-and-construction-of-1000kwa-stabilizer/
Here’s a typical structure for Design And Construction Of 1000kVA Stabilizer research projects:
- The title page of Design And Construction Of 1000kVA Stabilizer should include the project title, your name, institution, and date.
- The abstract of Design And Construction Of 1000kVA Stabilizer should be a summary of around 150-250 words and should highlight the main objectives, methods, results, and conclusions.
- The introduction of Design And Construction Of 1000kVA Stabilizer should provide the background information, outline the research problem, and state the objectives and significance of the study.
- Review existing research related to Design And Construction Of 1000kVA Stabilizer, identifying gaps the study aims to fill.
- The methodology section of Design And Construction Of 1000kVA Stabilizer should describe the research design, data collection methods, and analytical techniques used.
- Present the findings of the Design And Construction Of 1000kVA Stabilizer research study using tables, charts, and graphs to illustrate key points.
- Interpret Design And Construction Of 1000kVA Stabilizer results, discussing their implications, limitations, and potential areas for future research.
- Summarize the main findings of the Design And Construction Of 1000kVA Stabilizer study and restate its significance.
- List all the sources you cited in Design And Construction Of 1000kVA Stabilizer project, following a specific citation style (e.g., APA, MLA, Chicago).